What Have You Done To Your 3rd Gen Today?

Re wired from a Distribution fuse block to the AuxBeam should have done it from the beginning. Also hardwired my signal booster and cleaned up some old wiring.

 

Does that setup require any trimming on stock suspension? The 703s might be the one for me!

 

These 5th Gen 4Runner lift gate pull straps might be an alternative.
You would need to bend the mounting end flat. I’m pretty sure it’s held on with a 10MM bolt so the bolt opening might also be better.
They come in multiple colors.

https://agency6.com/collections/toyota-4runner-liftgate-pull-strap

 

No trimming... I still have stock suspension. They poke out just a bit from stock wheels on my OR. Gives me a reason to install my Rekgen mudflaps I've had for a couple months. No regrets. Tires and wheels are killer.

 

Getting ready for the Dakar Rally……

Not really lol. Loaded up the OR’s for a meet up and sell in the morning

 

I sold mine on Craigslist, took about 2 weeks until I found someone serious. A lot of people wanting to pay me on Tuesday for my wheels and tires today type.

 

Yea Craigslist is sketch. OfferUp is worse. Marketplace not so much but they’re there nonetheless.
I actually am selling to an another TW member.

 

Dupe post

 

I really don’t like giving Craigslist my business since they’re full of puppy mills. Real scumbags preying on people to buy abused breeds and pups in horrendous conditions.

 

“LOL”

 

Some shenanigans today.

 

Is your wireless charger bubbling up?

 

If you have ramps you can slide right under with it on your belly. Start from the back 2 bolts.

 

Sweet! Where is the mount from? TIA

 

https://desertdoesit.com/products/u...unt-2005-2021-toyota-tacoma-2003-2021-4runner

 

I've got one; it's nice that the arb isn't exposed to the elements.

 

I'd rather take my time and do it right once than rush through a half assed job.

I feel like any wiring job takes a while longer to properly dress cables. The "install" is quick but the dressing takes time.

 

First camping trip with the new truck. Love this setup

Thanks @Discount Tire for setting me up with the wheels/tires. They have already proven to do great on steep inclines with loose dirt/sand

 

Installed OEM Toyota bed lights

 

Installed bed support that won't bust you or whatever is on the bed like the L bracket styles. Drilled out the 'optional' holes for hardware, honestly it should be mandatory considering the stresses being imposed on a singular rather thin bolt at the top for it to be considered 'bolt-on, no drilling required'.

Yes I know the painting is shit, and you are not supposed to use the holes in the bracket as guides, but couldn't find my punch and honestly couldn't be bothered to take the brackets off after fitting them, if it was someones else ride and I was being paid to do it, that would have been a different story.

Also, installed a catch can kit, hood strut, and found a injen intake on clearance for 30% off, so kinda just got it.

But, best mod by far, a B&M shifter. No more slamming into reverse when I wanted 1st when short stopping, reverse indent is really really weak with the stock shifter.