What Have You Done To Your 3rd Gen Today?

original spare with no sensor for now. kept stock sensors in stock wheels for seasonal wheel swap. DT ordered sensors with tire/wheel order. Was the next day when aftermarket sensors synced up. both wheel sets tpms work now.

 

IKR?! And, at least for me, it continued to get better over the months. Enjoy!

 

It's from desert does it. I really like there stuff.

 

Didn't want to stick my rear cam on the rear window so mockup my own mount from parts I had laying around lol

Need to run the wire better

 

Nice work. I did something similar on the wife's RAV4. Worked great. Which dash cam are you using?

 

Not sure if the HPS air intake will make a difference, but I like the look.

 

i did it too - honestly - these OTT tunes are how the truck should come. Mine was like a whole new truck.

Although i did mine medium and spicy, which may not be everyone's thing, but the point is stock tuning is way to blaaaah and unresponsive. plus @JustDSM is super responsive and great customer service!

 

If you pair this with the TRD air accelerator that fits on the input of the airbox you will improve air intake even more.

 

Thanks for the link. Those look a bit more stylish than the basic black! I am surprised they don't make them with the mounting piece flat for Tacoma, doesn't seem like a stretch to do so. Wondering how it would be compromised by buying one and straightening it out. Would suck to snap it.

 

Well one of these days Ill mod this for real but today. This truck after 10 days has become mine every car of mine has a hula girl been doing that since I saw it on Con-Air

 

What offset are your AGP wheels?

 

17x8 +5mm offset

 

Sweet! Look awesome!

 

Thanks man! Stock suspension Trd sport with 265/70/17 just fit haha

 

You’re welcome.
You bring up a good point. It would take some MacGyver’ing.

I like your idea of adding the pull strap to the tailgate, Brilliant.

 

Ha! Dashboard art, I love it.

 

Busy morning…now time for some football!
1- Hood stripe decals
2- Yellow fog light decals (painful but got them on…sort of off center a bit, prob try again if it bothers me too much, that said, might as well schedule that root canal I been putting off, can’t be as painful as putting on those stupid things)
3- TRD Skid plate
4- Tyger 3.5” runners

I also did some interior cosmetic stuff continuing to black-out and add accent colors, but this finishes my initial set of mods. Waiting on my Diamondback SE still.

 

Nice work, looks great!

Tip for adding the fog light film... take the fog lights out, add the film, reinstall the lights. The fogs are held in place with one (yes one) phillips head screw. You can easily reach down from inside the engine bay on both sides to access them. (I swapped out the OE halogen fogs for OE LEDs previously so I had a little head start.) A tiny bit of brail work, but it only took me about five, maybe ten minutes tops to install Lamin-X film on both. Just sayin'.

 

I'm going to have to do this. I used kryoln stained glass yellow spray paint twice in 3 years. Unfortunately it just doesn't hold up to the elements on the front and bottom of the truck. I guess I'll eventually get a set of these, pull out the lights, clean off the remainder of the yellow paint, install, and forget.it sucks because at first the stained glass paint looks great. Oh well...