1st Gen Lunchtable Thread - General Discussion

There's some parts inside the expensive shiny tube I dare say.

 

epic bracelet

 

Nice! This one's mine. Fun fact king and icon use the same span.

 

Going to the settings. Look at the "about watch" and it should tell you the model number .

 

That took longer than expected for someone to catch

 

I want one lol

 

Sweet, I didn't know that. I'm trying to figure out what the hell this existing valving is supposed to be

 

My niece made it for me. Or it was my wife. Not sure since they were making them and this ended up on my wrist.

 

Can you measure the individual shims, the shim total take a picture and email king. They may be able to tell you.

 

Oh, I measured them all it's just a really weird compression stack and and a pretty standard rebound stack. I bought these used so I was trying to figure out how the hell they were used that this valving is what they ended up with.

 

If it helps at all this is what was in my kings. 2.5s and yours look like 2.0s it would be different but maybe you can take something from it. seems like they put flutters in most of their stuff from factory

 

Hmm, yeah these are 2.0, any pictures of your rig and how they are mounted?

 

Front is a Camburg kit with mounting locations changed and in pockets. about 1.66 : 1 motion ratio tire : shock. 18" 500lb spring.
Rear is all OEM 4 runner mount locations, OEM replacement kings but custom ordered length around 10.5" shock travel if I remember.

I'll go grab pics of angles etc. at ride height cant find any that show the rear well.

 

Anyone want some TC ball joints

 

You're right! He just needs to make sure to order the correct size band for his size of watch -- being either 41mm or 45mm.

 

Yeh but that price makes me suspicious

 

Jesus, this frame.

 

@JTFisherman So this is what I had planned for my truck, its always been just a little bit soft to me. I always have the compression adjuster maxed out but I don't have much for shims on hand just some .015...

 

Well, gonna tap this bad boy for raw voltage

Will finish opening her up tomorrow



But I'll need langmuir to send me a new VIM module to get back up and running with THC

Getting no continuity through the module which was the cause for 0 voltage when it would start running





Still under warranty, but once they see the results, I'll be curious to open up the box and see what went out on it

Maybe a voltage spike? Who knows but I doubt it as it receives 2.7v (divided voltage 50:1) via the CPC port

 

This is also a possibility with what I have on hand. Crawlpedia says doubled up shims are additive but not linearly so that last part of the stack should be stiffer than a .015 shim but not as stiff as a .020.