Arb twin compressor for rear air locker

My next mod will on-board air, I am pretty sure I am going expedition essentials bedside mount with arb twin compressor.

I know what I need as far as a harness and to run a quick disconnect fitting out my rear bumper for airing up tires.

What I am struggling to find is parts required for the rear air locker I plan to add when I regear for 35's I would prefer to prep in advance then have to re-do anything 8 months down the road.

For reference I have a 2015 trd sport no locker right now.

If someone can point me in right direction of a parts list or guidance it would be really appreciated.

I have read a fare bit but haven't been able to find a full description of what I need.

 

all you need is this: https://overlandoutfitters.ca/products/arb-air-locker-manifold-kit?_pos=1&_sid=f6a404329&_ss=r
Everything else will come with the locker itself (solenoid, air line, etc)

it will let you run two solenoids, one for the front and one for the back, as well as have an output for your air hose to air up tires. The other nice thing about it is it gives some space for the hot air coming out of the compressor to cool before it goes into your air lines or air hose, as I've seen those melt before.

You can also reach out to us (Overland Outfitters) about doing your lockers/gears or any other installs when the time comes.

Hope that helps!

 

Great thank you will do some internet reading, I didn't know you did gears I will keep this in mind I am still a bit away but prepping for 35's now...one step at a time I guess.