Ubolt flip kit has no relocation for bump stops

Hey guys,

Just got done installing my lift, getting an alignment done now. While installing the ubolt flip kit I realized that there wasn't anywhere for the bump stops to go. I'm sure I'm not the only one who has had this issue so just hoping to see what other people are doing in the same situation.

Right now I have no bump stops on it. I'm not planning on going anywhere off-road for a month or so so I have some time but since I do tow frequently I figured it would probably be something I should do down the road. Lift is about 2.5" altogether with upgraded parabolic leaf packs.

 

Most bolt flip kits assume that you will be installing aftermarket stops and/or suspension helpers. I'm not sure how you could throw the stock bumpstops back on there.

 

When you say suspension helpers do you mean air bags?

 

Photos would be really helpful.

check out sumosprings, timbren, or duro bumps for after market bump stops

 

https://www.alldogsoffroad.com/alldogs-offroad-2nd-3rd-gen-toyota-tacoma-u-bolt-flip-kit

I can get some pictures of it on the truck but it's pretty much what you see there.

 

oh man, ummm you may need a different kit. This set up might work with hydro bump stops but as is it seems options are limited

 

Yeah.. that setup doesn't support axle-mounted bump stops. The plates don't look wide enough for hydros either. See if you can send it back and grab the Archive kit instead with their yellow bumps.

Stealth HD Toyota U-bolt flip kit - 2nd & 3rd gen Tacoma 2005-2021, 1st gen Tundra 2000-2006 (archivegarage.com)