1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Front diff breather tube @ case

Discussion in '1st Gen. Tacomas (1995-2004)' started by Old metals, Sep 20, 2023.

  1. Sep 20, 2023 at 11:44 AM
    #1
    Old metals

    Old metals [OP] Well-Known Member

    Joined:
    Nov 14, 2022
    Member:
    #410626
    Messages:
    151
    Gender:
    Male
    First Name:
    John
    Vehicle:
    02 x-cab 4x4 2.7 2018 TRD Sport 4x4 3.5
    Original
    Hello again. The breather tube has a hole right where it goes in the case. Is there a trick, tip, kit, or anything for this without separating the case?
    Thanks
    JohnIMG_1585.jpg
     
  2. Sep 20, 2023 at 11:59 AM
    #2
    Bivouac

    Bivouac Well-Known Member

    Joined:
    Sep 5, 2021
    Member:
    #376253
    Messages:
    11,580
    Northern Lehigh Valley Pa
    Vehicle:
    2000 Tacoma 5 speed 3.4
    Remains to be seen I bought the tires and wheels the rest came along
    Clean as best you can either use epoxy or silicone your just needing to keep dirt and moisture out.

    That is what I would do.

    Use a light touch don`t block the tube.

    Good luck!
     
    Old metals[QUOTED][OP] and leid like this.

Products Discussed in

To Top