New England B.S. Thread

I switched pricing to be more legit since it's gaining popularity. Depends on bed and cab configuration as to how much undercoating you'll use (obviously). Crewcab 6ft bed is about $220-$240. Originally I was going to be at $150 depending but too many commercial inquiries and needed a better way to quote

 

Regular full size is 150 on my end as well as suvs. Bust for HD trucks I usually bump to like 220ish or more if really big

 

Thanks for the offer, if it was just 1 truck id make the drive to one of you guys but doing that with 4 vehicles I think it makes more sense getting a setup.

Really not looking to spray other peoples stuff too, I have the fab work thats doing well and that seems much more fun.

 

Join the dark side! Literally black hands face and all courtesy of woolwax <3

 

A drip of woolwax on you does seem much more comfortable then a blob of steel...

 

If you get enough on you you can use your tarp as a slip and slide without water or dish soap

 

I use sheets of cardboard from large boxes I've broken down, it doesn't get quite as slick.

 

I just let it soak my driveway lol

 

I use cardboard to kneel on and lay on in front of the truck. My driveway is that stone dust stuff so it's not very forgiving on the knees lol

 

Knees...HA! Mine's 1"-minus (A-B-C, roadbond, whatever you want to call it) I forget every now and then and kneel down without thinking, remember REALLY quick.

 

My driveway is sloped. I could line up all 4 and just work my way down.

Dont want that driveway to rust!

 

What’s your setup? I’m thinking to pickup another rod for saltwater

 

Roof rack saga update: the OEM rack wore through the paint, can't be buffed out. I have to take the new rack off because it sucks and I hate it. Taking it to my body guy to look at it next week

 

Around my area (Northwestern MA, Southern VT, Southwestern NH) we have Ramuntos. They're pretty solid. Their spinach artichoke dip is fantastic.

 

Bed line the whole truck.....

 

Anybody know where I can find the actual inspection criteria for frame warranty. Sent a guy to get it insisted as his front crossmember had a hole like 2 or 3 inches long. They said it only applies to the sides not crossmembers? I was like frame is frame that's bull

 

I'd tell him to try another dealer

 

The reel is a Diawa LEXA 300. The rod is a Shimano Trevala Jigging Rod, Model TVC-66MH.
Good outfit.
I also recommend a Quantum Accurist reel, mounted on a Dark Matter, Skinner rod, Model DMJB 68HC. This outfit is available online from J & H Tackle.
Here’s that outfit:

https://www.jandh.com/products/dark-matter-john-skinner-jig-and-bounce-casting-rods.html?amp=1

The HC model is the one I have.

 

WHOA. You are missing out.

Venus II was okay, had it when we played there but not making the drive especially where the other 2 locations are closer.

Seals the driveway I bet..

 

You mean burn the whole truck? Ok