FEND-X Tacoma Wheel Liners

I’ll pay for shipping and beer money!

 

Complete Fender Liner systems

 

@cnote4l or @bhova, do you have a photo showing where the L-brackets bolt up to the truck? I'm presuming that they go to the square/recentagular holes, but I'm not sure how that would work with OEM flares? Or maybe you're cutting tabs to bend for the fender cut?

 

Anything for ADV fiberglass fenders? ***no I have not read all 18 pages

 

Ordered!

 

Dang these look sweet. Going to need to order a pair to pair up with my fiberglass fenders!

 

It was a bear, and took a long time but I got all four in

 

I have had mine for like a year and haven’t installed. Excellent build quality just lacking time. Did you all remove your wheels before installing? Or were you able to squeeze up in it

 

Time is definitely something you’ll need.
I pulled my wheels, it’d be much more difficult with them installed but could be done

 

I would suggest removing the wheels as well. I installed mine with my wheels on(with 33’s), and felt every year of my age due to having the flexibility of a steel beam.

 

I still need to grab a set of these. Eventually.

 

So when I cut up my fenders cut smash and hammer pinch weld flat I can use the l brackets and have fully functional fender liners that will work with my 35's and bamf hybrid tube bumper on my 2015? Has anybody ran 35's with these? I'm worried about the rear because I have a arb compressor in the bed cubby that will get ruined without liners front has snorkel so not as worried. I noticed in one of the pictures the new liner sits outside of the flare a bit is this an option or how they all look?

 

I got these and "cut up my fenders cut smash and hammer pinch weld flat" for my BAMF plate bumper and 35s. I posted here (several posts above), emailed, and I think also PM'd OP to ask some questions about the install both before and after receiving my order, and he never responded. I couldn't figure out a way to install them (and neither could the fab shop that I use), because they weren't wide enough to reach the cut fender, even with tabs on the fender to use as an attachment point. Ended up selling them at a loss and said fuck it. Still riding dirty.

 

Did you order with the L brackets and specially for cut up fenders and your bumpers on the site?

 

Ordered with L-brackets and specifically for the cut fenders and bumper. I have a suspicion that I was accidentally sent a set for uncut fenders, but, since OP never responded, I wasn't able to confirm.

 

hmm interesting, I have read on here that they are not good at emails but do answer the phone, if I do go this way maybe i will give them a call before I order to confirm this all.

 

Have run both 315/75r16 and 35x11.5r17 with these liners on my 14. Ordered with L brackets and 2” cut around bushwhacker fender flares.
Install was tricky. Really happy tho with finished product

 

So I ordered a trimmed set mistakenly and had to reorder the full size ones because my fenders are not “trimmed” in the way I thought the product description meant.
The standatd size is SIGNIFICANTLY wider than the trimmed size. If the set you got were too narrow you definitely got the trimmed set.

If anyone is in doubt in the future, order the standard size and then trim to fit.
+1 for phone contact. Emails were not replied to, but answered the phone and talked to me for almost an hour helping me with my issue.

 

Well, that explains a lot. I expected the set for trimmed to be wider, given that the distance from the lip of a trimmed outer fender to the inner fender is further than that from a stock outer. Weird.