285/75/16 on stock rims with 32mm wheel spacers and a 2.5” lift?

I saw a video in where a guy put 285/75/16 on stock rims with 32mm wheel spacers and a 2.5” lift. Can anyone confirm or deny?

 

I did this with 1.5” spacers and a 3” level kit. It’s doable but the will rub

 

What do they rub on and is it only at full crank thanks for your response. By the way.

 

Do you off road at all?

 

285/75r16 2" spacers no lift

 

same setup with 3" lift

 

Well that looks great devinzz1 do you have any rubbing?

 

not with 3/4" wheel spacers. anything wider than that and you will rub with or without a lift. with 2" spacers i had to do a cab mount chop

 

1.25” spacers w stock or wheels is what I’ve read on here a few times.Lots of info on here, still reading up. I’m heading to 285/75-16’s next up from 265/75-16 w a 2.5” full suspension OME lift. Looking for options as I’d rather not CMC, but looks like you did a good job! We’ll see as I do go 4wheeling but nothing to heavy to avoid body damage! Definitely going w BFG ko2’s!