What Have You Done To Your 3rd Gen Today?

You spilled almost as much oil as I did this past weekend. I was so stoned I forgot that the oil filter purge valve didn't drain the crankcase.
"Why did it only drain a few ounces of scalding hot oil onto my hand? The ground is barely wet. WTF?"

 

Kinda cleaned my truck (the hurricane did it)



also... average 2nd gen owner risking their lives and the people around them just to cut off 3rd gen owners
https://www.youtube.com/watch?v=lWRKw0Jqt6c&ab_channel=Michael

 

thats actually water. i rinsed mud off truck before i did this. large portion of it poured onto me when i dropped the skid plate.

 

Time for a TuRD PRO skid plate like mine, so you can spill even MOAR OIL!

 

Yanked needle bearing (broke the ECGS puller!) 2888s, AAL & 5100s went in over the course of a few days then got the new wheels & tires today!

 

Installed a Warn Semi Hidden bumper (no winch though probably not ever use it).
So easy to install, why are more 3rd gen owners not getting this thing? like the bar, but I do need to move my front camera now.

 

New front and rear bumper from Backwoods Adventure mods. I cannot decide on a cap though.

 

Only if your tires have unique, sequentialized stocking numbers.

 

I put those, or similar, in my 2022 SR. I bought a new stalk switch to have the on/off where it should be if it came with it. The way it was wired in, the backlight feature was always on if the engine was running. Really not a big deal unless I wanted to play covert. I was planning on just running a second switch that would cut the power completely to the fog lights if I needed too but upgraded to the 2023 OR. So, with the engine running the backlight was always on, use the switch to actually turn on the fog lights. I did not have the LED headlights.

 

Received my TRD Pro shift knob today. Also installed the TVD Vinyl Decals. Came to the realization that my eye sight and hand eye coordination are not what they used to be. After lots of cussing and destroying the extras, got it good enough. Pretty sure the D is backwards, whatever.

 

Made a DIY dash rail with some scrap aluminum, a $15 MagSafe phone mount and $5 on some hardware. Already had the MagSafe phone case.

just need to paint it. Very satisfied

 

Looks like TRO. The D is not defined enough.

 

Ordered wrong part. i wanted the bed side rail cover without the tonneau cover. And it still have the cut for OEM tonneau cover. Which I didn’t want. (Trying to go roll up cover) yes i have both side.

any of ya know the part number for without the cut? Also do 2nd gen bed side rail cover fit on 3rd gen?

 

Getting ready for the cooler weather with an oil change. Giving the Toyota oil a go this time around.

 

Got tired of looking at my rapidly deteriorating prinsu rack so I went ahead and gave the truck a haircut. After driving it for a few weeks now without the rack assembly I had uptop all I can say is wow. The truck feels like a damn race car in comparison and I gained back 3L/100km across 3 tanks now. I knew it would made a difference but holy it was drastic.
If prinsu doesn't warranty the rack I don't think it's going back on.

 

Most, like you, don't need it. So why would they?

 

Good looking bumper, Im waiting on an SSO shorty that looks very similar.

Does that bar block the TSS?

 

why put on brighter lights if you are going to block them?

 

Fedex lost this for a handful of days, but finally recieved my Manual tcase. Probably swap it in Friday, and goodbye to the picky/unreliable electrical stuff for good.

 

maybe no use for a cattle guard?
it messes with tss?
but it matches your chin strap just fine