What Have You Done To Your 3rd Gen Today?

lol Same here wether it’s the last bolt or the last bolt that’s missing

 

It was easy. I followed a pretty thorough YT video. Seller on eBay had excellent condition oem at $250.

 

Looks Perfect

 

Best money I think I put on the truck. Got it installed yesterday ay my 110km service. Needs a small alignment needs to go about 1/2" to the right but overall super happy with it.

 

Like yesterday unscrewing the torx bit and i couldnt get the airbag out. The bolt was still catching on, you have to wiggle it around lol

 

Made a long boring video on running 37s. Perfect morning poop material.

https://youtu.be/3yOu62ojRiY?si=pWfETKK_r7pK1MKp

 

Hmmm. This looks interesting. Is the install hard? I guess this is more for people who haul loads frequently or tow?

 

Pretty easy, just gotta jack up the truck to let the lca hang, then unscrew the old one with a pipe wrench and screw in the new one. I got durobumps but rears sumos

 

People have had issues with the posts on the front sumos being too long and making install difficult. The concern is cross threading them because the bottom of the sumo springs contact the LCA as you begin to start the threads. I just turned them counter-clockwise while pressing them in place until the threads were lined up, but others have cut down the threads a little to make install easier.
I have a heavy ass front bumper and was wiggling all over the place just backing over the smoothed curb at the end of my driveway. These reduced body roll significantly and made the vehicle much more stable through turns at speed

 

Thanks. I am going to put these on my list of possible modifications. $600 for front and rear is pretty pricey however. Especially when I'm not in need of any suspension upgrades.

 

Looks good with the bucket on the roof, personally I would have used a black bucket. Not really into the flashy colors. You can keep the grill though.

 

All, want to thank everyone for all the great advice and guidance on my little build, but sadly it’s come to an end. I sold my Taco thurs (but made a killing on it). But I will stay in the Toy Family for my new build and purchased a 16 4Runner SR5 Premium. I will keep my acct open bc a lot of thing here will pertain to the Runner anyway.

 

To this

 

Dude, those are some beefy side steps.

 

Someone on squattedsilverados.com told me rough country spacer lifts add ground clearance, ride quality, less stress on steering and suspension components compared to brands like icon and fox. Told me it was just as good as major name brands but for 1/32 the price. Figured I’d give it a shot on my factory hitachi coil overs cause I’m a cheap son of a bitch

 

Haha, my lady “made” me put some on bc it was a PITA for to jump in every time. And these were Stainless Steel (she even paid for them!)

 

Make?

 

N-Fab Podiums