What Have You Done To Your 3rd Gen Today?

FINALLY got around to installing the SET port option puddle lights. They've been sitting in a closet since I bought the truck two years ago.

 

@Shmellmopwho killed it with this removable slider step! Asked him to come up with a step for the sliders I had from him so that my wife could hop into the truck easier being 6 months pregnant! Should be able to pop it off when wheeling!

 

I love that bumper! So clean

 

Like your Alu-Cab Canopy shell!

 

^Mr Ed ?^
Nice looking truck and slick air line setup

 

Your OTT is medium/mild and spicy ?
What’s the V9 a new version ?
I have the medium/Spicy I got about a month ago and love it !

 

Has anyone here had issues with the automatic hanging in 5th gear, revving up to 3500 rpm, with OTT. I read a few posts about that on FB.

 

Thanks buddy! So happy it works nicely for you guys. Thanks for the love!

 

Went with the 5100 and Icon aal .

 

only STANT

 

I like what you did

But....

Consider using heavy gauge wire rope for the risers. It has proven useful for industrial mobile equipment.

Takes a lick'n and keeps on tick'n.

 

Online says #10504. O'Reilly Auto Parts says "no fit 2022", but if @TacoTime55 says it does not give an error code about vapor-leaks. Online also reports "Stant is after-marketed by many ... ONLY get a Stant in a Stant-box".

 

I went out for a little drive yesterday hoping to catch some high country fall colors. Tried out a trail I've done several times in the past in my 4Runner that is just plain easy after a rough area to start. It seems a lot of water has come down the road recently and we didn't get as far as I wanted to. All it took was a couple big rocks with a washout in between to stop my forward progress (the furthest rock in the picture; looks small from here with the dashcam photo lol). I might have attempted it if I had a good spotter or saw another truck pick a line, but the only other vehicles I saw were RZRs. I do have to say I love the locking rear diff; had some slippage but locked that in and had perfect grip for the part we drove.

 

I got mine from Amazon: Stant Regular Locking Fuel Cap, black https://a.co/d/hhyUFqD

“After-marketed” is a very generous way of saying there are fakes out there.

 

Love the wire rope on stakebeds and box trucks near the lift gate and stuff like that but for this needed to make sure it was super rigid and didn’t flex at all like wire rope does (not much but it does). Also easier to get my hands on flat bar as opposed to wire rope not to mention easier to weld to flat bar than wire rope

 

I bought them from Toyota a while ago, this was the part number:
РТ948-35220-03.

 

Took her to Hollister Hills….again

 

So how is it, notchy? Welcome to TW btw.

 

Had OTT since February and couldn't be happier. No issues here anyway.

I'd ask @JustDSM about it on the OTT thread:

https://www.tacomaworld.com/threads/overland-torque-tune-ott-by-overland-tailor.759590/