What Have You Done To Your 3rd Gen Today?

Put on new tread

 

What type of tires are those? I went to your build thread, but could not find it (Probably missed it).

 

Sorry ... I didn't put these in my build thread.. maybe I should? I consider tires a maintenance item at this stage and figured that unless I went up a size that I wouldn't include it.

I started a thread about these a couple months ago when I bought them .. hopefully they work out.
https://www.tacomaworld.com/threads/gt-radial-adventuro-atx-review.811241/#post-29247612

 

A few mods. Having fun doing the mods I’m comfortable doing. New grill and lights. TRD cold intake and oil cap. New brake lights and a hand full of interior mods, new Alpine speakers, LED lights and storage console organizer. I absolutely love my SR5

 

Has anyone tried the Falken Wildpeaks HT02 yet?

 

Well I pulled the trigger and purchased the Cali raised amber fog lights and brackets. They just looked too good to pass on. Pictures posted when I get them installed. Just too many mods for these trucks. Makes them look hella good.

 

For the haters ….. Raptor lights !

 

Tested cheap seat heater kit I got off ebay. Works fine for what I paid. I also tested 3D printed blank switches designed for inserting round switches. Looks like I am in need of a stronger filament. My project continues on!

 

The big sandy area before Sayers lake, where the road goes into the group campsite

 

If black filament is your thing, Atomic filament; Carbon fiber PETG will take the heat and the stress. I've used it to make new feet for the collapsible cap chairs and they survived several seasons before the fabric dry rotted. Also, Filaments.ca has a carbon fiber Polyester/Polycarbonate blend that takes even higher temperatures, but you need a high temp hotend and a relatively warm enclosure. I've used both for odds and ends in my truck and around the house without issue.

I've used the carbon PETG for production fixturing of parts during selective solder of PCB boards without issue.

 

I have a Pro and I'm thinking of swapping out my Rigid fog lights. For those that may have done this, did you need to get stock fog light brackets and bezels or are there full kits out there? I've looked at Baja Designs, Diode Dynamics and Rigid can't seem to a complete kit. Any guidance would be appreciated.

 

Thanks for the advice! Would you suggest PETG for printed fuse block mounting bracket under the hood as well?

 

Got my homelink mirror from bobsmirror the other day. Plugged right in no conversion harness needed on my 23. Something it should of come with from toyota.

 

Under the hood, I would use the Filaments.ca material because of the higher glass transition temperature.

 

added some extra protection with these OEM Door sill protectors from Toyota.

DCSB Part number:

$45 PT747-35201-02 , Black

PT747-35201-02

 

I went with Diode Dynamics SS3 Max’s and they are direct replacements with the right kit. Hit up @memario1214 for the best pricing.

https://www.diodedynamics.com/ss3-led-fog-light-kit-for-2016-2023-toyota-tacoma.html

 

looks great nice job

 

Getting ready for a 1100 mile road trip so decided to hook up my plug and play Uniden laser/radar detector I ran in my BMW that was much needed not so so much in the taco.
But figure on my road trip it’ll come in handy on those long late hour stretches of road were I loose track of my speed . Also going to 285’s I’ll have a better idea how much my Speedo is off.

Simplest add on to date but effective

 

Smart!

 

I’ve seen some lidar around Portland and in the Bay Area but for the most part a Ka radar detector will tell you where all of the law enforcement is in Oregon and down I-5