(SOLD) Bed Drawer System- $300. Includes deep cycle battery and fridge slide. Northern Virginia.

Up for sale here is some DIY Bed drawers I made. For a 5' bed 2nd gen Tacoma. Might fit 2016+?

Materials used are Marine grade 3/4" plywood w/ Bed Coating on exterior surfaces and polyurethane on interior, 1x material for the framing, heavy duty drawer slides, and a steel fridge slide I designed and welded myself w/ 1/8" steel angle and more locking drawer slides, and some logisitcs track for fastening materials on the top deck.

I designed this specifically to leave room for a standard sized 10x10 pop up tent, and set the height so a 12" dutch oven could fit in the drawer. There is room in front of the drawer for a group 34 battery with mounting hardware. And some room to spare for other electrical components. I will include the X2Power battery I have. It's old now- 2018. But still holds a charge and has been stored on a tender.

I don't have room for this in the garage anymore. The parts in this thing alone are worth well over my asking price. Really just looking to get this out of the house and to someone who will enjoy using it as much as I did. It's heavy but durable and easy to configure how you like.

Pick up in Sterling, VA

 

Steve, this is worth it just for the battery!

Didn't you make the fridge slide?

 

@Tiny's Taco you should pick this up!

Or @BigMacMcCoy

 

Hey David! Hah seriously. I looked in my email to find when I bought the thing and realized the battery cost $315 alone.

Yes I made the fridge slide. Its built to fit a dometic cfx35. When the fridge is on it tilts, but without the weight of the fridge it stays flat. The weight on the frame helps to counter the weight of the fridge so its not as hard to tilt up. Here's some more pics:

 

Free bump.
I’m building my bed drawers now and the drawer slides alone in the OP build are worth close to $300

 

If you feel like driving clear across the country, it's a solid deal

 

I've got the 6' bed and no shell, but I agree that @Tiny's Taco should pick this up! This looks awesome

 

PM incoming.

 

Pending

 

It's got a new home. Had to adjust it to the center because of the bed supports. And will probably try to make the battery area water tight without having a cap. But for now...