Front door speaker question.

Hey I've got a 16 Tacoma with the JBL audio in it. One of my front speakers blew. 8616004130 is the part number on it. It seems like it isn't shaped like a common door speaker, what speakers could I replace it with or should I just go OEM again? I'm having trouble finding the wattage range listed anywhere in my searches or a mounting hole diagram.

 

I tried searching the threads first, I hope I didn't miss it. I just need the one speaker replaced.

 

Crutchfield, go take a look.

 

I forget about them and their compatability thing. Thank you.

 

No worries, just replaced mine a couple of days ago,

 

You will need the correct Ohms load or it will damage the amp . I think the JBL is 1 or 2 ohm
To be safe go factory

 

Higher ohm would be fine on the amp, but the volume would be lower.

 

2 ohm system on JBL, anything more than 2.3 ohm you will lose sound/performance of system.

 

with the jbl system, you're better off replacing it with the oem replacement.

the jbl system is highly customized for toyota's purposes, and there aren't very many alternatives to any part of it outside of ripping the entire radio, amp, and speakers out and starting fresh.

 

You should be able to find a set from someone here who did just that

 

OEM part

 

That’s the way to go

 

I just tossed the ones from my 2020 in the trash a couple weeks ago since i had 1 blow out and replaced it with these from Infinity, 2.7 ohms and I don't notice any significant volume loss: https://www.crutchfield.com/S-hGKTC...vOfm1RZZhgS1axRvxD029obVD1TJZ4OhoCxlwQAvD_BwE

These are about $100 for the pair and if you order from Crutchfield they will include free harness and mounting kit.