What Have You Done To Your 3rd Gen Today?

Finally added the AJT cup holders. Awesome. And totally worth the time.

 

AJT Designs sells cool knob replacements.

 

Hella late to the party on this one. I also work night shift and love these lights for the same reason. I honestly wish there was a way (aside from a lot of soldering) to eliminate the various illuminated buttons/indicators on the console and various switches.

 

Mind sharing info on the holster set up. I'd like that for my 40Cal

 

Wonder if you turn it 90 degrees if the fuel mileage will increase? I’m sure the steering will be much more responsive, as it will now act like a small sail

 

I changed the rear differential gear lube on my new to me Tacoma. I just hit 60,000 miles on it

 

Those wheels. LOVE

 

My Prinsu racks came in today. Got the topper rack put together and installed. I'm going to have to wait for the cab rack because I had to order a hollow punch.

 

I took advantage of the 25 percent off sale and finally got my tire out of the bed. The long bed got longer and much more difficult to park. Wilco switch. Built pretty solid.

 

Something I learned with mine, you’ll likely loosen the topper rack and adjust it like crazy so you can get the sides to align perfectly with your cab rack. Took me like 30 minutes but I got mine plumb on with the cab rack and it looks great!

 

Thank you, appreciate the tip.

 

Finally got the yellow lenses for the SS3 Max Fog Lights and got them installed

 

I'm sure someone else has asked this already but did you get the limited edition Chevrolet Tacoma Raptor edition? Maybe I'm missing something but that's just what I can make out from the grill

Like the amber...just got the kid brother version Elites installed this weekend

 

Close it's actually a F-250 Ranger TRX Edition with a 1.1L 60HP Yogo engine for some POWER.


It's a joke between a friend who has a Chevy Colorado with a CRD (Chevy Race Developments) vinyl so I got a z71 badge lol. It's fun seeing peoples reactions and it's usually the person is confused, laughs, or thinks I'm a totally idiot for having z71 badge on a Taco all of which are great

 

Installed driver side CB antenna bracket and laid out all the components, tested and tuned the antenna, got it to SWR 1.3 on channel 1 and 1.1 on channel 40. Run the wires through the firewall and hooked it up to the battery.

Next Saturday we’ll do the final install - run the coax to the cab, install the control box, figure out a good spot for the mic and do some more tuning since I’m also adding a spring mount to the mix.

 

Installed said skid plate.

 

Nice. Dig the paint job. It will serve you well when you have to repaint it once you do a little offroading.

 

Before (color is different due to the lighting differences - it is a 2020 Cement)



After

 

how are these as a step? I know that's not what it's made for but just curious. I hate how side steps come out way to far. These look good.