What Have You Done To Your 3rd Gen Today?

For all the world to steal, then remove the tires.

It is confusing, I know. "security locking" wheel nut that can be so secure you cannot remove the wheel when you need to. Strange times.

 

I still have the OEM TRD Off Road rims, don't think anyone would want to steal them. But I still keep the wheel locks on to prevent delinquents from loosening the wheel nuts.

 

Wooo!! Thank you. I appreciate the support

 

Is it not under the back seat with the jack, or the factory didn't put it in the vehicle.

 

Did you have to install anything for the SXM atenna ?

 

It is held in place with a Velcro strip. The bottom piece is also Velcro’d to the rear piece. I haven’t removed it yet but will let you know.

 

I purchased everything, H.U., Speakers, Mounting Kit, Plug and Play Adapter Harness's Sirrius Tuner and misc all through Crutchfield. I both talked and chatted with them to be sure I had everything I needed. They have a great support staff. I had to splice just one wire in for the a.m/f.m antenna. There is some programming of an interface module so your steering controls and back up camera work. No big deal to do. I also have a audio junky friend help me on a couple connections. It wasn't cheap but no regrets.

 

The XM and GPS antenna are plug and play. You need to purchase the XM tune separate which is plug and play. Only one wire to tap in for the am/fm antenna. No big deal. I also had to use the mic that came with the Head Unit.

 

Someone mentions 'drill' on the dash, and I run for cover!!

 

If someone loosens 5 of the 6, they have probably achieved their delinquent goals.

You may want to consider where you park.

 

I just got the same ditch lights too. I had a difficult time getting the hardware together too. They should have shipped them with lock nuts instead. To get them to run with the DRL you would probably have to run a relay and set the DRL as the signal wire so they would come on at the same time. Im still trying to figure out how to wire mine up. It would be cool to have them come on with the automatic high beams. But for now mine are just going to my switch panel. I just cut the harness before the relay so I could just have the power wires for both the main beam and the backlight and ground.

 

much better. Did you buy local or off a website? If website, can you share?

 

from what I understand, it’s the rarest interior in the 3rd gen. Will keep the value up over time and age well.

 

I just got it used from eBay from an independent seller. I stalked the site for a while until I found one cheap from a well rated seller.

 

Good idea

 

The dealership probably didn't put it back

 

New tails

I love them more than I thought I would. Buy sum although I’m interested in clear PPF film to protect them too.

 

How are your husky mats?

 

Bag your alternator and battery with plastic bags, Simple Green the entire engine bay and engine, let it soak for a while, pressure wash the entire thing, and blow dry with a leaf blower or compressed air, then towel dry, wipe down everything with protectant. I've done it a million times on my Subarus and Hellcat without issues. I don't see the Toyotas being any different.
Good use for those new thick plastic grocery bags they charge $.10 for...

 

Also Rad! I had a Greddy Type A in my 14' STI and the Team Orange Kit in my 06' STI (Steering Wheel, Quick Release, and Shift Knob). I love me some JDM hotness.