What Have You Done To Your 3rd Gen Today?

What about the factory mic or did you have to install the aftermarket mic?

 

If you need to use an aftermarket mic, this one snaps right into the unused OEM location in the overhead center console: https://shop.enfigcarstereo.com/product/enfig-mic-toy1/

 

Front diff & Transfer Case fluid change.

Front diff magnetic drain bolt was full of sludge.

Most of the work was taking off my TRD skid plate, lol.

 

Took her about another 200 miles south

 

My buddy showed up 8 hours late so prinsu didn't go on today. Rain tomorrow so probably Monday morning. Just a pic of it sitting on top. I just wanted to see what it would look like. I like it.

 

I don't!!! JK
Looks awesome!
You got plans for the racks!?

 

Very true, would still never do this again though...

 

I had to install and use the mic that came with the H.U.

 

Got around to installing the 2wL mod

 

Installed Cali Raised dash and quad lock for perfect phone mounting

 

Side and tailgate wrap




Leer Quad fold doesn't rub on cab





Real gas cap holder
Gas Cap Holder Compatible With Tacoma 3rd Gen 2016 To 2022 Fuel Cap Holder Black | eBay



Two position tail gate



Western Plow

 

Welcome to TW!

 

Did you just swap the bottom bolt on the strikes? assuming with the same bolt the factory hook. The cable end is not too tight to fit on easy?

 

I did not have to use any harness for the headlights. They are plug and play. I had the oem DRLs. If you don't have Oem drls you have to use a separate set of wires and wire the drls up separately. Search YouTube for install videos and you will see what I mean. You can also check out fitment on different websites.

I do have aftermarket fogs. They are a random Chinese brand I found on Amazon. They have halo LED drl rings and separate LEDs when turned on with a wide and spot lense. They are made for toyotas and fit in the oem fog housing bracket. I've had them for around 2yrs now and they have surprised me how well they have held up. No lense coloring or vapor leaks. I expected to have to replace them with something more expensive by now but if they ever did need to be replaced I would probably buy them again off amazon.

 

get the dealer to do it

 

Alright. The weather outside is frightful, but I managed it to sound deaden one door while I still have some free time and daylight today. Installing an aftermarket sound system in the Northeast in the winter is not what I would recommend. I have all my speakers ready to go. I had to use a hairdryer to keep the door warm

 

No I purchased another tail gate cable, and it comes with another cable bolt. I then removed the lower latch bold and put the cable bolt in it's place, I works good for hauling wood, gate is at an angle and wood doesn't slide out

 

Almost bought those Morel's, but went with Focal Auditor's instead. Curious what you think of them.

 

Installed a lift and 35s with 5.29.

 

Woah what is this??