What Have You Done To Your 3rd Gen Today?

Replaced the emblems on my husky weather beaters with TRD pros and bought a new set of shoes!

 

Boring choice I suppose, but they fit my needs. Goodbye stock Toyos that were really starting to suck in the wet.

A few days late to post, but new Kumho Crugen HT51 tires in the stock size. Yeah, my wheels are dirty, I need to clean the truck.

Rides nice, no vibrations, already better in the wet. Let's see how they do over time. I like them so far.

 

Time for the 6-inch lift and the 37s!

 

Finished CB radio install. Got 1.4 on channel 1 and 40 and 1.1 on channel 20.

 

Those are 6 1/2 speakers not 6x9's so the adapter has a 6.5" hole in the middle. The baffles were for 6.5's so that's their actual exterior dimensions on the front. I only trimmed 1/2 the back for water drips.You can see it from behind in this pic

 

Looks like max range for a truck..
Tune in Tokyo for my 80's peeps

 

True story ...

Wilmington, NC ... battleship North Carolina which is now a museum (go see it if you can ... get the "Hidden Battleship" tour if you can! https://battleshipnc.com). They have the original vacuum-tube radio on board, which they finally scavenged enough tubes and other parts to resurrect.

THEN ... they called Pearl Harbor all the way from Wilmington NC.

 

Midnight with a full moon???? Awesome!

 

Welcome to TW. I purchased my 2022 mainly because I did not want a 4-cylinder turbo engine. I would prefer a gasoline 8 cylinder however I will settle for a 6 cylinder.

 

Really need to get another CB rigged up in my Taco. Had a full set up in my JKRU before selling it, as we do a lot of rock crawling and even more camping in remote National Forrest areas and found it invaluable in certain situations.
An absolute necessity in Moab for EJS.

 

My thoughts exactly, love my Quicksand, but the Army green would have been my next search.

 

Quicksand is still the coolest though.

 

Yes I get that those are 6.5 with a 6x9 adapter- was curious why not go with 6x9 baffles so they are sandwiched between door skin and adapter vs adapter and speaker.

The speakers I got came with tape for behind the speaker but nothing for behind the adapter. So when I noticed that and the fact my stock speakers had mold I went and ordered the baffles to help address both.

 

Bought this to hold my personal and work phones:

Zebra TC77 TC70 Scanner Holster...

$15 Zebra TC77 TC70 Scanner Holster Carrying Case Pouch Compatible with Zebra TC75x, TC75, TC70x, TC70, TC72, TC77 Handheld Barcode Touch Mobile Computer,Scanner Case Holder with Metal Clip and Belt Loops

https://www.amazon.com/dp/B0BKFJRNR3?ref=ppx_pop_mob_ap_share

Mounted it similar to the large water bottle holder mod.

https://www.tacomaworld.com/threads/tool-less-32oz-cupholder-mod.672736/

Frees up the cup holders and has an extra pocket for a parking pass, membership cards, etc.

 

I agree.

 

Congratulations! Has to be an awesome feeling!

 

I haven't had to plow for a while but from my past: The truck and especially the transmission just has to work harder. You're pushing a heavy load, going into/out of reverse constantly, and taking a lot of impacts (the plow doesn't 'roll' over bumps it hits; although it does have springs to lessen the impact). Of course just putting a plow on in and doing light plowing probably won't make a difference but a lot of plowing will wear any truck out faster.

 

Upcoming Winter Jamboree in Sand Hollow was the push we needed to get this done. My husband rigged up his JKU the weekend before.

 

Quicksand is my second favorite! But, as an old retired Army officer, how could I not go with Army Green?

 

Replaced all driveline fluids, and greased the front shaft, consistently surprised how long it takes! Had to break out the torch to help break the f’n front diff Allen key drain plug, used the opportunity to swap over to the Lexus plugs after. Redline 75w85 for front and rear diffs, Toyota 75w T-case fluid, Redline MT90 for the tranny. Also got new Wildpeak 265/70/17s loaded up.