FS: CEMENT GRAY Custom Color 5100s Assembled

I have here a set of fully assembled Bilstein 5100s with OME 885 springs on them. All brand new hardware including the top hats. The kicker here is that we've powdercoated the springs to as closely as possible match the color of the 3rd Gen Tacoma cement color. They came out looking .

These will lift a 3G Double Cab Tacoma 1.5" or an access cab 1.75".

$715 SHIPPED to the lower 48

*Don't worry about the little hang mark on the shock on the right. We spray these knowing how they'll assemble so that spot, when installed, will be to the rear.

 

Oh... They'd probably come in around 2.15" or so assuming you're 4WD. That said, if this is the spec you want we'd be better off coloring up another set for you and putting them on some 2nd gen specific shocks. The valving is a little softer on that spec.

Get off my lawn!

 

Sent

 

They're at the 1 or "stock height" setting. Since we leveraged lift springs they are set at the bottom to avoid coil bind.

 

Bumpin!

 

TTT!