What Have You Done To Your 3rd Gen Today?

Just speed up the inevitable and buy a high clearance hybrid bumper

 

How is the wire harness on the ditch lights when you lift the hood? Mine gets crushed by the windshield

 

Added Sequential Turn Signals to the Mirrors, added an LED tail light bar to the rear, added the drop in cup holder and door pocket rubber mats with the heritage yellow orange red colors. Finally installed my Ham radio permanently, installed the Dash Cam permanently, and then re-mounted the Tonneau Cover so that it is a little better fit and seal - included putting in drain holes so that the drain tubes go through the bed and drain below.

 

Curious, how long would it take you to get that fire extinguisher out in an emergency? Just a thought, but wouldn’t it be quicker if the bottle was flipped around so the top was facing the door? You wouldn’t have to loosen those hose clamps so much to clear the nozzle head. Just wondering.

 

Replaced the wiper blades with Bosh Icons this morning.

 

@BLtheP has a Rigid light bar I believe, and has no issues. Posts 272708/pg13636 shows them in use and post 272799/pg13640 shows installed.

 

I don’t have any issues with mine

 

I have a white 3rd gen peeling paint TRD Sport. I noticed that the blue and red Hot Wheels are "guaranteed for life", but the white one isn't.

 

dangg boiiiii

 

I installed a 30” Rigid light bar a few weeks ago and no issues with it. Cooling system is still staying at 195. We’ll see when Texas summer comes back around. Manual transmission so no transmission cooler, but mid ‘20+ models don’t have transmission coolers anyways and nothing changed in the transmission cooling besides deleting the cooler and rerouting the lines, so even if it does block it a bit it shouldn’t cause anything worse than how the 20s and later are stock.

Vast majority of your air comes through the upper grille anyways.

Only complaint I have is I get some whistling now and then which I dampened with door trim molding yet I still get noise sometimes. I’m chalking that up to “oh well.”

 

Ahh I see, I have DD SS2s and the plug is on the rear, not the bottom. very nice!

 

Thanks brother!!

 

Good eye. That's hilarious!

 

I know I’m probably just another guy posting his TRD Pro grill but I love it. Easy upgrade from Taco Garage.

 

Less than a second?

 

Got it. I didn’t see the entire unit. Looks good.

 

Like the basic utilitarian look of the white SR.

 

You looking to sell that?

 

To remove the OE 12v socket, the panel has to come out. To remove that panel, the center console, and the lower section of the dash need to come out. I’m sure I’d be able to do it faster next time but this was my first time with this vehicle. So, about four hours is what it took me. The Teamster in me works patiently and makes sure I take my breaks.