What Have You Done To Your 3rd Gen Today?

Just want to go back to stock.

 

PM sent.

 

Personal choice.

 

Yes
SuLokiy Universal Quick Release...

$19 SuLokiy Universal Quick Release Roll Bar Fire Extinguisher Mounting Bracket Extinguisher Mount Holder Compatible with for Jeep Wrangler Gladiator UTV Polaris RZR Ranger Can-Am Maverick ATV

https://www.amazon.com/dp/B08DCDZMWK?ref=ppx_pop_mob_ap_share

 

Actually want to remove all mine lol. Too many wires going through mine

 

Winch install.

 

knee deep in rubber

 

dont tow anything

 

And then some……These have performed great so far. 10 ply sidewalls are nice for airing down and doing stupid stuff.

 

Looks nice. What bumper is that?

 

Don't want to start an oil thread!

But do want to ask if you take advantage of the extended life capabilities in that oil?
Nothing new. Mob1 has had that available since the late '80s. Check out the second bullet point:
.


Edit: On second thought - don't answer! If you do, it WILL start an oil-thread-rabbit-hole-debate. No one wants to spend the time reading another one.

 

Question for all of those who have added stuff externally.
All of my adds have been internal or were not obtrusive enough to get in the way of the car wash - except the Ham Antenna, And I just remove that before washing.

Do all of the bars and lights and other things we/you have stuck to your Taco get in the way of the car wash?

 

I've never had a problem hand washing mine

 

Wash it by hand. You won't have those concerns.

 

depending on what you have added externally the automatic car wash generally is a no go. I haven’t been through one since adding my snorkel, prior to that I knew a couple brushless ones in my area that were gentle enough my roof rack and ditch lights could survive

 

Yeah - I pretty much need to keep it Car Wash Slick. I don't have time to run in and get a bag of Peanut M&M's when I'm getting gas. No way I'll have time to hand wash it. And it goes on the trail so it's no princess. The only coin-op wash around here is in Da-Hood.

 

What bumper is that?

 

As far as tacos go, they have smooth curving body panels that makes it a breeze to hand wash. I used to work for a guy years ago who was obsessed with detailing his pickup. Always remembered what he said about car washes having dirty brushes and wheels to never go through them if you want to keep your clear coat from scratching.

 

Good way to look at it

 

My late Christmas present to myself came in last night.
I’m going to mount these and look into welding some tube steel to them and do a frame mount to make them into real sliders. I thought about building my own from scratch but for the price of these I can mod them into what I want for a third of the cost of sliders. Prolly a retarded approach but what else is new