Taco Lean in the rear?

I’ve noticed that my truck is leaning, no frame damage and the spring hangs r all perfect. the shock was just replaced this is also on a full tank. only in the rear the front is normal

 

That is Amazing stance

 

Gas tank lean. Learn to love it.

 

really? i see other tacomas and they all look straight minus mine LMAO

 

That seems like an awefully heavy lean. I'd guess something isn't right there. Have you thoroughly checked underneath? Anything loose or bent perhaps?

 

nothing looks out of the ordinary. when i lift up that side of the bed it like evens out. so im not sure if its a bed issue that needs a spacer?

 

I'm not joking, look it up. Some do it worse than others.

 

that looks pretty extreme. something doesn't seem right.

Was it just the shocks changed, or the leaf springs? Maybe side specific and on the wrong side?

 

yes, Tacos are prone to the 'taco lean'. Yours seems excessive though.

edit: in the photo you are not quite in the middle of the stall. Is the stall sloped?

 

How about a photo with a nearly empty gas tank?

 

i think this is a pic of it, when it’s almost empty the lean is not that bad at all

 

the stall was not sloped

 

I suggest you measure each side on level ground with nothing in the bed and report back.

My rear differs about 0.5” right to left in the rear.

 

i have the icon RXT leafs i had them installed by a known suspension shop in town. i have bilstein 6112 in the front and the 5160 with res in the back

 

Should i measure underneath the bumper to the ground? or where should i measure from?

 

had this issue with mine, noticed it after installing my new suspension. Went to the place that did my suspension install and had them raise my drivers side a little more since my suspension was adjustable a bit. Seemed to fixe the lean for me.

 

I suggest the center of the wheel to the edge of the fender flare because it is a common measurement that you can compare to others.

 

I was told they tried to compensate in the front but the issue in the back. Did the raise the front and it fixed the back?

 

measure from bottom of fender flare to wheel hub.

 

Alright i’ll do that tonight