MAP, DOME, & CLOCK NOT Turning on. I changed fuses for them and still no luck.

MAP, DOME, & CLOCK NOT Turning on. I changed fuses and still no luck. I may have to change a relay in order to see if that works, and/or test all fuses for connectivity. This occurred when I wanted to replace my halogens to LED's. I guess the china made crap short circuited my ports or somethings because the moment I got to replace my driver side MAP light ( MAP lights, DOME and clock timer) went out at the same time. Since then I have returned those parts and am trying to address the current issue before I spend money on USA made Sylvania ones or something. Frfr

Please help. Any solutions?

 

What year is your truck?

 

2011 off road TRD

 

The Dome fuse powers all 3.
But there is a connector between them.
Are you getting power to both sides of the fuse?
What about the white wire on the dome light connector?
(You could “carefully” probe the bulb insert) one side should show power.

 

No power to either the MAP lights and the Dome lights, including clock timer at the moment, unfortunately. When I pop the cover for the dome light, I dont see any wires visible, so no white wire, I can check again to see if I spot the white wire. If I do, what am I supposed to look for in that?

 

Check for power on both sides of the DOME Fuse (7.5A) first.
Does anything else in the truck not work?

 

Ok, I'm going to swing by my local autozone and borrow their multimeter tool so I can check. Starting from Dome light.

 

Why not buy a cheap multimeter and test light? They are must haves for electrical troubleshooting and are pretty inexpensive.