San Diego "Yard Sale"

JL Audio subs and amp. Installed from previous owner. Pulled from a 2nd Gen DCSB. Fits comfortably behind the rear seats with the cubbies removed. All wiring included to plug and play with the stock system. Everything works great, subs are not blown out. $Make offer$

 

Ironman FCP front coilover with the lighter coils. Fits 2nd and 3rd Gen. Less than 3k miles. Went full steel bumper, then got different coilovers. $900 will include spanner wrench

 

FS: complete foam sets (2) from my Apache 9800 roof cases
brand new
$20/set
SD

 

Bilstein 5100 with ome 887x coils and oem leafs with add a leaf. Bought these from another member with the intentions of putting them on my truck. Now they're just sitting around so need them gone. Was told the 5100s and springs have less than 10k on them and a little under a year old. Oem leafs with add a leaf too I think. I can't find the post with the info on them. Just trying to recoup what I paid so 200 obo. Pick up in Santee

 

Pending.

Free-3rd Gen rear seat storage bins. Must pick up in Carmel Mountain Ranch, off the 15. Would hate to throw away, but only looking to hold on to these for another week.

 

*****SOLD*****

My loss is your gain. Bought this lightbar to go into my BAMF bumper but the housing is a 1/2" too big to fit. This is brand new, open box. Green tint on lightbar is the protective film.

Info: 30 Inch Yellow Lens Single Row: Black Oak LED Pro Series 2.0 LED Light Bar - Combo Optics (150w)

The New Black Oak LED Pro Series 2.0 - 30" Yellow Lens Single Row Includes:
- Complete Wiring Harness with fuse, relay, & switch
- Mounting brackets
- All hardware ready to install

360° Ceramic Protection from UV, Salt Water and Corrosions
“One of the most popular trends lately has been ceramic coating vehicles and boats. We have since added a Baricoat ceramic coating to our lights. It is an added 3-part protection from UV, saltwater, and corrosion. You'll never have to worry about what weather you put these bars through as we made sure every aspect of these lights can hold up to any environment."

https://www.blackoakled.com/collect...ro-series-2-0-led-light-bar-combo-optics-150w

Retail is $564.

Looking to get $425 obo local pick up (San Diego). I will ship but buyer pays shipping.

 

In Yuma Arizona

05 Tacoma to current
OEM 2.5 kings RR for o to 1 inch lift

$500 obo

 

Hey y'all,
I have a bent tailgate that come off my 06, its the factory tailgate that has been on since 2006, it still opens and closes just fine but if you put any weight on it it will bend and can be bent back no problem. After loading and unloading my motorcycles a few times it developed a bend. I've been using bent for over 10 years. I replaced it with one from a salvage yard before I got my truck painted. its complete and comes with the straps on the side. the sheet metal is starting to tear at the top middle just under the plastic, no dents has scratches.
Not sure what it's worth so come get it Free.
Pics below are the tailgate on and off the truck.
Located in Mission Valley, can deliver too on the weekends, just shoot me a few bucks for gas.

 

Happy new year everyone, I'm offloading some stuff sitting in storage:

3rd Gen TRD Pro Skid Plate: SOLD

Pics:

 

Located in East County. ARE CX camper shell for 3rd gen 5' bed, MGM painted, with a hybrid prinsu/martin off-road shell rack mounted on the tracks. Front window folds down, and also slides for access to the rear cab. Driver side window is sliding. Passenger side windoor folds open/lockls. 3rd brake light is plug and play and works. Interior is carpeted and in great condition. Never had any water intrusion. Shell is in really great condition, I had it on my truck for 2 years. Rear lift struts could use replacement, that's about it. Paint is in good condition, there are some pinstripes but nothing deep. A detail and you wouldn't notice. I did experience some minor rubbing against the rear of my cab while going higher speeds off road, so there is some minor rubbing on both sides however it does not rub all the way through to the fiberglass. It's cosmetic.

I removed the shell about a month ago to replace my bedsides (still haven't gotten to that lol). Now that it's sitting in storage I could use the cash for other projects. Asking $2,000 for the camper shell and roof rack setup. No trades. I can try to get more pics of the interior, it'll be a workout ha.

 

I was able to mount a TRD pro skid plate on my 2019 offroad DCSB without cutting. I vaguely remember the trd skid plate using different mounting holes in the front than the stock splash guard/skid plate on off roads.

 

Appreciate it, though it won’t fit because of other modifications I have on the front LCA cam pocket. I’d have to trim the side walls of the skid to clear it. Also going to the JD fab setup and won’t be needing this anyways.

Beautiful skid plate and very lightweight, hence why I held onto it in storage!

 

Ahh that makes a lot of sense now. GLWS!

 

SoCal local pickup $200
PM if interested
2nd gen 4.0L

 

been looking for one for a minute now but you’re a ways away.

 

Posting for a friend. 2nd gen Tacoma Bamf front and rear bumpers. Front has center hoop and rear is a high clearance non swingout. Located in SD. PM if interested.

front bumper SOLD.
Rear bumper SOLD

 

Hows the fitment?

 

doesn’t fit in my storage hence the sale

 

Haha...fitment on your truck...not your storage

 

it’s not on my truck it’s in storage.