C4 Rock Runner Series FR Bumper

mine is mounted as shown and I can reach through the circled hole to turn it on and off. Best way to get it to fit is by mounting the bumper and taking your grill off, once you do that you can set the winch in and adjust as needed. Then place the grill on again and it’ll bend the black plastic interior just slightly allowing the module to fit. (I can add more photos if needed)

 

Any update on release date?

 

No it must be close because they still keep posting garage shots of it on a gen 2

 

It’s the rear bumper but got it bolted on, I’ll be making the final adjustments today!

 

I want it as well but dont like the fact that it doesnt extend till the corner of the fender flare

Dont mind the front being short but do mind the rear lol

 

Yeah I get you that was a big concern of mine it doesn't look as bad as I thought it would in person! Plus it'll line up when I do a trim on the flares/bedside when I go to 35's

 

Send some side view pics

 

Well. Started the install today. First test fitted the bumper and noticed something that may be a problem later on. With a previous bumper I was out in Utah and busted a AC line due to it being to close to the bumper. (Around $500 repair) Wasn’t trying to have it repeated. AC line was about 1/8-1/4” from the bumper. Didn’t want to risk it with the way the truck is used so I grinded down the section to give the line a little more room. Check your clearance Gents!


Also mounted the winch. I ended up mounting the winch first then installed wiring from winch to module after installing the bumper. Used the C4 relocation bracket. (Excuse the dirt). Wanted to make sure it would work before painting the relocation bracket. Now in the process of paint drying.

 

Just noticed my bumper is touching the AC lines after your post. Don't feel like taking the bumper out so I may just add a thick washer to push the bumper fwd like 1/8" and will call it done

 

Found some shims that should help me fix that wo removing the bumper. Amazon crap for the win

 

Yea definitely address the issue. Won’t happen right away but will slowly eat through that line. Expensive repair

 

Definitely an expensive repair, wish I would've noticed it during the installation

 

Does the bumper come in one box or different boxes? How big is the package?

 

Just one box, not sure about the dimensions

 

Playing with the S1s and kinda didn’t like either option,

Guess I have a brand new set of S1s for sale…

 

Ordered placed. Tube sides/no delete. Anyone installed it with the trd skid plate? Did it work out?

 

I have the trd-off-road stock skid and if you want to use the stock one you have to drill two holes in the stock skid since they don’t line up

 

What lights are doing instead?

 

No bumper lights at all

 

Thinking this is the best spot for the s2s.