Shop Time w/T.W. Friends. Torque wrench on spark plugs, we need answers so cast your vote now

You could build pedals that would work your feet would need straps so you could pull and push .

If your shoulders were so ruined you could not use your arms .

 

In my career we had two clients that had lost both of their arms and still drove. Scroll down a bit on this page.

https://drivemastermobility.com/products/steering/

 

I relish the simple things.

Bent a piece of plastic today to contain the annual mess an oil change on the zero turn used to produce.


Also bent a few pieces of wire and melted them into my snowblower to reattach a broken chunk of plastic. I fixed it mostly to keep snow off the belt, but I think it's pretty strong. BTW That whole mess is behind a cover.


I tack welded it on the inside first with my soldering gun.

 

I can smell it

 

They need the holes clocked differently. 11” OD x 26” long. Let’s do this.

This piece cost $4,000

 

That section of pipe reminds me of these days

Do you know what commodity is inside that section?
(Thats not me)

 

Some sort of rockatoon fuel?

The one I'm working on goes on a portable transformer and will have oil going through it.

 

Thats cool its portable. Yeh liquid hydrogen, so cold that after we flowed lh2 through it, I went to bump those nuts to 650ft lbs and often times the studs would just crumble into dust. Obviously because they had frozen and been been compromised with moisture.

 

It was over 60 degrees here today, an excellent day to get some work done.
.
.
.
Ah, heck with it...
Hit the road instead.
.
.
...80 miles later...

 

Lol. We just got back from an ice cream run as well.

Traditional waffle cones. 74*. Told the wife we eating at the outside tables. No ice cream in the truck.

 

That was gonna be my guess! Either that or LOX. Figured I had a 50/50 chance

 

Lox pipe is much smaller based on the quantity required. 8" diameter as I recall.

 

That sucks man! Hope the airport has a bar, or snack stand at least.

 

I’m not sure if I’ve mentioned it before, but I have my type 01 FFL, and have had for 11 years now. Just a little side gig. I’ve been thinking of getting a suppressor for a bit, but didn’t want to spend the money or wait. One day out of the blue I decided to send the government more money and apply for my SOT dealers license. Guess what came in the mail today?!

 

I had my 07 ffl for awhile. Got rid of

 

Were you manufacturing at all? I almost went that route but did t want to mess with the ITAR tax

 

Yea I did. Taxes especially in the great state of CA got out of hand here that’s why I got rid of it.

 

That is bad ass!

 

Thx

 

That looks like something to be used in a action movie.

2X B@d @$$ !