C4 Rock Runner Series FR Bumper

Done! A few thing still to fix but is mainly done. ! After this economical damage, some recovery need it, .. and then tires

 

This is what i did with mine.

 

Had a fun time getting the coastal off road crossmember out to get this new c4 one in. PITA grinding the welds off but got her to fit. Just waiting for paint to dry and throwing the bumper and skid on today

 

POS compared to the c4 one

 

If the old one still intact, id take it off your hands so i can custom fab one that will work for my setup.

 

It’s cut so it’s now shorter then the length in between the frame rails but you are more then welcome to have it if you need it for reference fabbing your own.

 

Looks pretty sick. Now gotta figure out lighting

 

I like how awkward it looks without oversized tires. I always wanted a bumper first but was too scared to commit before tires.

 

In the process of making mounts for my S1’s. Going to be removing my ditch lights and using the wide cornering S1’s at an angle instead. This would also work if I wanted to keep them straight for fog lights. Also made a hole to still have access to the nasty body mount bushings I’m waiting to receive to swap out without removing anything

 

I think I’m just gonna chop my grill a little to fit some

 

Here’s all I had to cut off going this route

 

Gonna chop more so I can weld in a bracket on the tube

 

Bracket looks great! Was wondering if you are going to add any bracing at the end of it since it look like it might bend a bit over time with the weight of that light and bumps?

 

Feels pretty sturdy when all bolted together and tightened down. If it does start showing any bending or weakens then you bet I will

 

Just joined the party! Ordered the RR front bumper with side plates and skid with cross member delete. Are y’all all running the R4T bumper caps? And did I see correctly that the RCI skids worked with the C4 front skid?

 

C4 selling their Rock Runner Truck.

 

I was able to make the front crossmember delete skid work with the RCI skids. The mounting points are just different at the end of the front skid. Drilled 1/2” holes through the mid RCI skid and used carriage bolts to mount the 2 skids together.

 

What light bar mount are you using for the top of the grille? Also how is the visibility with it behind like that?

 

SDHQ
https://sdhqoffroad.com/products/16...lt-behind-the-grille-dual-led-bar-light-mount

 

Not mine but how sick is the RR bumper looking on SAS'd Taco

On a side note, been wanting to sell my CaliRaised skids and buy the C4 cross-member delete skid lately... Who knows lol