What Have You Done To Your 3rd Gen Today?

35% tint all around and over the rear 20% factory tint

 

I put it with drl which I assumed was dead when the trucks off

 

Really nice contrast on Midnight Black!

I'm still debating going with 285s or 275s on 17" wheels with some pokey.

I have 25K miles before that...but a TRD Lift will definitely have to happen first.

 

Well, either your auxbeam is bad or that fuse isn't dead when the truck is off. I guess it's a decision as to which ones more likely. I can't remember what fuse I connected my aux beam too but I know it wasn't that one.

 

Installed a Rago Fab center console molle panel to hold my radio and a laptop table

 

Installed the oem headlights today. Thanks again @Puppypunter for the harness

 

Installed some bed Molle panels on driver side and front of bed today.. Builtright industries makes some quality Molle panels imo!

 

Where did you get the m-SD card?

 

Got my KO2s mounted today. Went with 265/76/16s on my stock wheels. Replaced Falken Wildpeak AT3s

 

Can I just share these two before & after shots? Crazy what about 3 grand and day off can do

 

I noticed a little power loss going from the stock 30.6" tires to the new 31.6" tires. I can imagine that a regearing might be in order with 33's. It might be a TuRD without the proper gearing.

UH60Hwkdrvr

 

Get a tune before you decide to regear. I have skinny 33's on mine and noticed a slight power loss too until I got the OTT. Now it has even more pep in it's step than before.

 

I'm seriously considering these, how hard are they to install? I've already swapped out the side mirror turn signals

 

I've got OTT V9, Mild/Spicy so no plans for re-gearing for me.

 

Tire size options.

UH60Hwkdrvr

 

Be interested in hearing your thoughts on the difference between the Falken and the KO2s. I'm currently running Faulken's.

 

Same here. I've had mine since June and although we have had little snow this year, so far I like them, but am always interested in reviewing other brands.

 

I have a set of K02's on my F150. Got them in June 2021, same day I bought my WRX from the dealer that's how I remember lol. Put about 40k miles on them since I got them and they got over 50% life left still, look awesome. I heard they get worse as they get down low, but haven't had any issues in the snow. On my Tacoma I went with the Toyo AT3, did tons of research and most people say they are better than the K02. I got both in E rating, I'm sure these E load AT3's will last me forever on my 2.7L Taco. Lots of people seem to like Falken but I don't like the look of them.

 

Utilize the mini fuse box under the dash not the engine bay. I think I used the 5a panel fuse, but can't remember exactly. My Auxbeam AR800 only turns on and operates when the headlights are on.

Also utilizing the 5a sft lock -acc and 10a IG1 NO2 with fuse taps for an arb twin. (ARB only works when truck is turned on)

edit: It was either the 5a panel fuse or the 5a sft lock -acc for the auxbeam