What Have You Done To Your 2nd Gen Tacoma Today?

Yep, OEM replicas from Amazon. I made a harness for them. I used a latching relay since the button is a momentary switch. Now the lights click on, click off. I didn’t like the look of the toggle switches and wanted a button instead.

2nd gens didn’t come with cargo lights or wiring for them. From what I’ve seen, the 3rd gens have the plugged cutouts in the bed and the wiring harness behind it.

 

Went through a little water to get the salt off the frame.

 

They did too

 

Got my new KMC's bolted on. 16x8 0 offset - still in the old 265/75 wildpeaks.












Got lucky and my ol ladies tires came in early for her Subee so got those installed as well. Bfg trail terrain 225/55r18






Is it weird that I'm more stoked about her tires

 

Got the same wheels, nice truck!

 

Thanks, yours too. I hawked the thread with these wheels for like 3 weeks before i decided and your rig helped w the decision

 

Right on thats how I decided on em too. Lots of good ideas floating around the forums. What else you got planned?

 

Definitely some 33's after i run these wildpeaks down the wire. high clearance rear bumper and stealth front bumper eventually.
Billy 6112/5160's. If it were up to my better half, nothing at all. Luckily these are things i "need"

 

The wives don’t need to know what we buy, all they need to know is that we’ll handle it if something needs to be picked up or moved

 

Todays project was the last panel that needed sound deadening in the truck.


Before, very hollow above the headliner




After




Amazing how much of a difference a few sound pads and cushions make.

 

Installed onboard air kit, Air Chuck on rear bumper and under the hood.

Need to revisit the design on the rear bumper tho. Looks fugly. Probably a flush mount.

 

Installed Marathon seat covers,I like 'em.

 

Changed the serpentine belt and air filter yesterday. Word of caution; be aware of the radiator hose clamps lol

 

I just drive it and maintain it. New shocks an springs on all four corners at 230,000 klicks

 

Have had the truck a year so far

When I first got it


After adding my flavor

 

Getting the same set up done to mine, minus the flip kit (durobump) and leaf pack (OME)

 

Been wanting to see if anyone will eventually make one that’ll fit a rear camera facing the bed like most new trucks have nowadays

 

I restored an old oem toolbox.

 

Filled my washer fluid.
https://www.autozone.com/antifreeze...r-fluid-1-gallon/1077649_0_0?searchText=rainx

 

Modified Havis console in progress. Wanted something shorter than OEM and modular without paying out my ass for a custom job. Will be converting to a three seater access cab way down the line.