Redside Electric Plug-and-Play Switch Illumination Harnesses

I’ll take it. Sending you a PM

 

The 12-18 ga. Posi-Tap ended up working fine for me.

 

Have you or could you make a simple plug-n-play extension for the switches?
I originally put all my switches by my left knee in my 4Runner but now a few years in I kinda wish I had put 1 or 2 in the center behind shift lever. I used solder, heat shrink, and braided sleeve over all my wires so I really don't want to cut anything apart just to move 1 or 2 switches.
If you're interested in making an extension, let me know and I can measure how long the wires would need to be to get from left side over to the blanks behind shifter in 4Runner.

 

The extra wires coming off of the green plug...what are they for? Do I need them if I'm only going to add 1 switch?

 

They aren't extra -- if you don't use them I don't think your accessory will work. One connects to a 12V+ source and the other connects to the relay of your accessory.

 

Sent you a PM to order one. Thank you.

 

@kmorgan3 are these still available? Would love to use it later this month when I do my 2 lo mod.

 

https://guildoutfitters.com/products/daisy-chain-harness

 

Hey there — I only keep a very limited amount in stock as I primarily sell through retailers these days. I’d recommend TacomaBeast or Guild Outfitters. If they don’t have what you need let me know. I have a restock for TacomaBeast coming in a few weeks that includes some of the less popular locations like below the head unit.

 

Will the overhead harness be part of that restock?

 

@kmorgan3 I bought one of your switch illumination harnesses, I think from guild.

It's the one that connects to the cargo light, and I want to use it to illuminate my anytime BU cam switch.

Can I just connect the red and green wire to the illumination wires on the ABC switch?
....assuming that the red is the positive and the green wire is the negative.

 

Hey there! Just came across this thread and I'm in the midst of figuring out how to wire up some new lights I'm looking at. I wanted to use the CH4x4 dual switches as well. Do you still offer daisy chain harnesses for those? Below is a quick wiring diagram I came up (apologies if it's chaotic, I don't normally make wiring diagrams) with for a dual function (amber & white) light bar and two sets of ditch lights. Was hoping to use the daisy chain to illuminate the switches but all I've found online are the single switch (4 wires) daisy chains, nothing for the dual switches (5 wires).

Skimmed this whole thread, to my understanding I wouldn't be able to add in a single switch if I've already got dual switches daisy chained correct?

(PM'd you as well)