Clunking from bed area

Anybody know what this is? Has been happening for a few months now and it's starting to get worse

https://www.youtube.com/shorts/ISChCDdkDp4

bed also looks like its starting to separate from the cab

 

Rear shock bolts still tight?

Other than that, I would get somebody to rock the truck with you underneath and have a good listen to the leaf springs and their mounts.

And the bed is not attached to the cab in any way.

 

Might also want to look at the frame side mounts for the bed .

They can rust bushings can dry rot!

 

Are you rocking the truck side to side? May be a good idea to check your lug nuts, your wheel might be loose. Other than that, like above, have someone jump on the bumper and for you to get underneath the truck.

 

In the video i was just rocking the bed from side to side, but the noise happens when you get out/get in the truck aswell. Thank you all for the suggestions, will check them out in the morning

 

Shock bushings or leaf spring bushings

 

Maybe somebody installed poly-bushings instead of the factory-type rubber bushings at the spring mounting points? Poly-bushings can be squeaky and noisy.

 

Spare tire can squeak like crazy if it's not tight.

 

would help to see what type of condition ur Frame/undercarriage is in.

 

X2 loose spare tire can make noise

 

May not be your situation. But I had clunking from my exhaust system. A couple of the hangers were missing causing the muffler and rear section to bounce and bump into rear leafs, which would echo in cab and sound like the bed was gonna fall off.