Complete 3rd Gen Front Bumper

It looks like they don't anymore since their website doesn't show it.

 

I emailed him, he said they're redesigning to be more standard.

So now I'm just trying to find someone with a destroyed driver side bumper cover to get their passenger corner.

 

Did this require any cutting?

 

Just the bottom of the grille surround if I recall correctly.

 

Missing this one in the list

Body Armor
2016-2020 Toyota Tacoma Pro Series Front Bumper Winch
PN: TC-19338
3/16″ Steel with 1/4″ winch mount
10,000lb winch capacity
High Clearance design that accommodates factory TRD skid plate
Requires trimming of factory bumper
Light fitment: 30” dual row LED and two cube lights
$840

 

do you have a link? thanks

 

So... being in California... What does everyone do with their front license plate?

 

ExpOne bumper has bolt holes to attach LP. It will cover the winch hawse so you could attach a spring loaded frame for the LP.

 

After removing the lower extension bars behind the stock bumper, the holes in the ends of the frame looks out of place, to me. So anyhow I figured out an easy way to make some caps out of 2x4 construction joints. I was going to, and may, lightly bondo and sand the small holes and inscriptions. Any how for a couple of bucks and some quality beer drinking time I didn't think they turned out half bad.

 

I'm in the waiting game now... waiting for my Relentless Fab Hybrid bumper to arrive

 

Sad to say I think C4 discontinued their Overland Series bumper and Proline 4x4 discontinued theirs too.. I was looking everywhere trying to find either for sale

 

I love the C4 Fab: Lo-Pro Winch Bumper. Kinda understated, but still bada$$!

 

Anyone know where I could find this bumper or one similar to it? Thanks!

 

I haven't kept up but they still make the bumper

 

Does anyone know if the Tacoma beast front bumper is made by c4?

 

For those with aftermarket front bumpers on a 3rd gen,

What are you running?
How much was it for parts/install?
How long have you had it installed?
How do you like it?

I like the new Rock Runner Front & Rear bumpers from C4 Fab, $3k for both with free shipping but are shipped bare metal

Extras for front bumper are tube sides, low bull bar, plate mount, winch relocation bracket, Agency fairlead and Agency shackle. Rear just gets double tube sides.

 

I built a custom bumper with winch mount and aluminum bash plate just to be different . Just need to mount the leds under the gap below the headlights.

 

Custom is the way to go

 

Impressive work!

 

Thank you