Radio instal

I’m currently installing a atoto f7g110xe radio. The issue I’m having is the constant power will turn off when truck is ignited.

I have tested all my connections no faults there.

Is there something I’m missing?

 

Hey there, Welcome to TW.

A few questions.

1. When you say ignited, does that mean when cranking?
When the truck starts?

2. Does the radio work when the key is in the run position?

3. What years is your truck?

4. Did/Does it have the JBL system?

 

1.the constant power turns off only when the engine cranks

2.the radio doesn’t work in the run position

3.the truck is 2005

4.I do not know if it has a job system

the only thing I think is the problem is the I wired the ground to the acc and the acc to the ground

 

this the chart I’m using to connect wires


These are the power wires

 

I'm trying man.
But you asked this question in the 2nd Gen section.
And the pictures says for a 2003 Tacoma.
A 2003 Tacoma is not a 2nd Gen.

So, is you truck a 2003?
Also, can you tell us what colors the wires are from the truck.
It's hard to tell.....

Looks like a White, a Green/White, and a Brown?
Is this correct?

 

I figure it out. I did have the ground and acc wires swapped. Thanks for help