BAMF High Clearance rear bumper "Modular DUAL swing out"

https://www.classicindustries.com/product/153999b.html

just installed mine and it works great.

 

Oh shit!!!! In stock even.
Nice Thank you

 

Any buddy have any feedback and/or pictures of the 3rd gen standard no swing-out bumper?

 

I personally prefer the look and strength of the High Clearance. It's essentially the same bumper from the back without the wings under the bed sides.

 

Still love this bumper @JLee .

 

By far the best looking HC bumper out there.

 

About to get my bumper curious if anyone’s come up with a solid idea for the stock camera relocation?

 

Hi Steven. I can probably print you the mount I came up with for mine.. not sure if you remember seeing it when we were out. You could also probably fab something up quick and easy for it on your own or with Andrew. Otherwise.. I can print it and get it to you guys whenever the bumper shows up.

 

Josh, are you going on the trip this next weekend? Bumper should be arrive and be installed prior to that trip . I didn’t pay attention to all the little details of the bumper just knew I wanted it

 

Probably not unfortunately. Have some stuff to take care of.. unless things change.

 

No problem, I'll collaborate with Andrew and brainstorm some ideas. Looking forward to camping with you soon! Have a great weekend!

 

Same man! Hope you guys have a good trip! You're gonna enjoy the rear bumper. Be prepared for the weight though. You'll likely need some fresh rear springs. I can't remember what you were running. Also.. some beefed shackle hangers will help with all the sway from the added weight and make it more rigid and stable out back.

 

Deaver/DMZ Long Travel leaf springs, can’t recall if we upgraded a shackles.

 

Hey you mind taking a picture of the camera mount?

 

https://www.tacomaworld.com/threads...r-dual-swing-out.639405/page-67#post-27020476

 

Anyone know the weight of the HCRB with the hardware, powder coat, rub rails and NO swingouts??

 

I went with a plug and play camera relocation kit and used the license plate mounting bracket it came with to mount the camera to the bottom of the license plate. It works really well for me in that position, better than stock camera too.
https://tailgatecamera.com/collecti...camera-relocation-kit-with-oem-wiring-harness

 

DMed.

 

Printed a small batch of the camera relocates for some testing. These aren't perfect and may need a little hand work to get them to fit as the printer cant hold the tolerances I designed them to. I don't like putting out half-assed work.. but I figured these little guys aren't that critical and the solution is better than nothing. Just a little end-user heads-up.

Parts are printed in ABS to withstand temperatures and impact. They come with a flat cover/filler plate to cover the OEM location once the camera is removed (attach with 3M or Super Glue) as well as a new housing to secure the camera (re-using the 2 small OEM screws) to whatever surface you choose with 3M tape. I have had mine mounted on the top of the rear bumper with 3M tape for about 2 years now with no issues here in the AZ heat.

@Gat_ and @radio1521 I can get these out to you for some testing/feedback.. just shoot me some info and I'll figure out shipping costs, shouldn't be more than 9 bucks (I'm thinking 2 day flat rate). If all goes well, I can start printing small batches for people who are interested.