What Have You Done To Your 3rd Gen Today?

Thanks guys! Idk what design I'll do bc I never even thought of this before, but it's a cool idea

 

Do some research online and you can likely pick up a small Silhouette or Cricut cutter fairly cheap.
Not sure how the Cricut cutter software is, but the Silhouette cutters do come with basic software to allow you to import JPG and other types of designs that will allow you to print, then cut out all sorts of stuff.

You're really only limited on what designs you can cut out by the width of the particular cutter machine and your computer/PC knowledge.
Both the Silhouette and Cricut cutters are open in the front and back so that as long as your design is as, or more narrow than the cutter you are using, you can print out any design as long as you want.
I printed out a cowl stripe for my previous Jeep that was probably +6' or more long and I incorporated a mountain scene into the driver's side as well, so you can go super long if you need.

 

If you make the mistake of going the jewelry route, that will become the threshold of expectation for the rest of your time together

 

Looks great! I did the same to my fogs over 7 years ago, still looking good.

 

what’s with the sock on your brake fluid reservoir?

 

I thought it was a can koozie for decoration.

 

115k m refresh today on my 2016:
-5100s front & back with the 4Runner front shock lower bolt swap
- @TOTAL CHAOS cam tab gussets
-OEM Toyota tie rod ends, sway bar links and LCAs
-Alignment

 

The two aren’t mutually exclusive, it can be both! You all aren’t using your socks to keep your beers cool in a pinch?

 

Yeah, just changed mine out at 60k. Seemed ok. Old oil looked good, but new oil made the ride feel smoother. But that could just be a mind thing. I get that same feeling with every engine oil change as well.

 

Lol, nope. I have plenty of koozies.

 

Another vote for a https://www.silhouetteamerica.com/. You can create any type of sticker. I haven't used it for a Tacoma purpose yet but recently used it to create switch panel labels for a homebuilt airplane. The software takes quite a while to master.

 

I'm not sure! I think it means that mine was manufactured at the factory in Mexico. Soooooo, yours was probably manufactured in some country or state starting with S?

 

part number?

 

And purpose/benefit if you would?!?

 

90105-14104


The benefit is the threading running less far up on the head-side of the bolt so the lower shock bushing sleeve doesn't rest on threads but rather on that solid threadless part of the bolt. Avoids clicking and clunking over time.

https://www.tacomaworld.com/threads/the-infamous-click-up-front…going-down.800581/

 

Olympian show-off.

 

Today projects. Installed front and rear bump stop w/ U Bolts, grab handles, and shorter anodized black color spacers to lower my roof rack a little. The spacers that came with the kit is too tall IMO. Plus it’s not black color and look out of place.

 

damnit now I want to switch out my spacers for the black ones. Thanks

 

google said the reservoir sock serves to absorb any brake fluid spillage or seepage to keep it from corroding important parts…..seems unnecessary but who am I

 

Theft. Last few days shutting my driver's side door I hear a rattle. Day later i see its my gas lid door shaking. Today investigated and see that I have loaned a bumper stop to a fello Taco Owner. DUDE, how's it working out for you? If your R&D is complete can you return my bump stop? Thanks bud.