35s 3.5 inch lift

35s with a 3.5 inch vertex lift kit also 1.5 inch wheel spacers do I have to cut my fender?

 

No.....

 

So you're putting on 3.5" suspension + 1.5" spacers (which is 3") for 6.5" of lift? You're going to have zero down travel and shocks that are constantly topping out. You need to rethink your strategy.

 

This happens more then you think.

 

Try the 3rd gen section. They have all the answers there.

 

1.5 wheel spacers

 

There so much variables with your question. Wheel offset plus 1.50" wheel spacer can push the tire away from the UCA and frame but might end up against the front bumper or fender when lock to lock.

If you're just doing this to make your truck look mall rated badass, that's dumb. Think of how much fuel you're burning to roll those 35s and the amount of wear and tear it will cause. Hopefully you considered gear with those 35s and that equal $$, even more $$ if it's 4wd because you'll need to do both front and rear.

What's wrong with 2" lift and 33s?

 

They don't qualify as sic mods.

 

You have a first gen Tacoma?

 

Maybe try to use some punctuation, so we can actually read what your question is.

Anyway.. 35s with a spacer lift and wheel spacers sounds pretty stupid.

 

I do

6" lift with 343/85R17

 

LMFAO

 

make

Rgiht!

 

Buy a suzuki sidekick and call it a day

 

You have to cut on front bumper and cut fender rear of front wheels

 

dumb question. I’ve got 2” dobinsons on my 2001. Can I clear 255/85/16’s? Running 235/85/16 with no issues.

 

Idk, can you?