What Have You Done To Your 3rd Gen Today?

How muchie?

 

Not sure honestly, I’ve got 2.5” lift in the back. I have a little rake so I’d say 2” in the front best guess.

 

Hauled a go kart for some kid Offroad time.

 

Bastards! Check your cabin air filter (accessed thru glovebox) - they're able to get in there from an opening in the cowl below the windshield. Check your engine air filter - they can get in the air box from the intake that’s in the passenger’s side fender well. I installed gutter guard in the cowl opening and engine air box intake.

I tend to go nuclear on these type problems (especially since they chewed through a $6K wiring harness (pro tip: don’t drop comprehensive)) so now have rodent boxes with bait located around the perimeter of the house, spray mint around and under truck, and sprinkled repellent along the driveway.

Suspect what really worked was the abandoned house next door was finally renovated and has people living there now.

Good luck.

 

Thanks! I got a set. I have around 1.3" up front, so I may have to trim them up a little bit.

 

Installed the volume/ seek button from @MESO. Now I have to re-train myself to use it.

 

Finally got around to putting in the AJT oversized cup holder that I got for Christmas

 

I thought the same, if need be I could trim them. Looks like a box cutter and a steady hand would make quick work of them if they are too long.

 

Installed some baja designs sae v2 squadrons

 

I used a extra fine manual hacksaw. Super clean cut. I just trimmed off the bottom portion. I think that will be enough.

 

Project completed.
Out with the old, in with the new . Dropped 5/8" in the front and 1/2" in the rear as expected.
Alignment next week.

 

Is this what y’all are using for this project? I’m going to build me one or more.

 

Wish that I can but can't do that in dubai man

 

I put mine in last week. It’s great.

 

I need to do this too. I hate the way the oem switch works.

 

yup, it's back to front - what were they thinking?

 

They were stoned out of their minds.

 

the design is to match the format on the screen

 

I saw this in another thread...

https://www.tacomaworld.com/threads...elated-no-talky.26810/page-5967#post-29572144

 

Installed the

$330 Wireless/Wired Adapter for CarPlay Android Auto Compatible with Toyota Tacoma 2014-2019 Entune 2.0 High Definition Audio High Screen Resolution.

CarSynch Tech Apple CarPlay/Android Auto module. Works great and I’m thrilled to have car play (wireless!!) in my truck! Finally an affordable way to get current infotainment in the Taco!

Just posted an install review in the audio/video forum here.