What Have You Done To Your 3rd Gen Today?

Spark Plugs @ 58.5k miles.

First time spark plug change for this 2021 v6

Everything looked normal except ignition Coil #4. The spark plug was loose and it visibly had oil.



Here is the gap upon removal.


Ignition coil


Could it be valve cover gasket leaking or it just came undone on its own?
No misfires either.
I reused the ignition coil and I know there is still some oil residue in #4.
I'll keep an eye on it

 

I bought these from Crutchfield:
-Kicker Front

$111 46CSC6934 Kicker CS Series 150 Watt 6 x 9" Car Audio Coaxial Speaker Pair, Black

46CSC6934
-Kicker Rear

$77 46CSC674 6.75" 6-3/4" 600w 4-Ohm Car Audio Coaxial Speakers CSC674

46CSC674

 

I had all 3 extremely loose on the passenger side and a couple on drivers side slightly loose from the factory. Same oil mess on the threads. Swapping them out made a huge improvement.

 

Any recommendations for auxiliary powered devices/equipment except lights, winch, or compressor?

 

Damn. Welp, that's reassuring
Thanks for the info!

 

a few...

 

He meant HIGHLY VISIBLE, so that people will walkup to his truck constantly and ask questions.

 

Got these too, haven’t tried either kinda scared

 

Red Hot might actually be good (at least going in)

 

Nice looking rig....

 

Tossed the skid back on today after blacking it out with Line X last week

 

Any thoughts? I've been looking at a set-up like this as an option to my ground tent. Thanks for any input

 

Got my fridge slide all put together. Looking at the forecast it might be warm enough this weekend to paint it.

 

darnit lol

 

How easy was the installation? Do you have a list of everything you used. Looking to upgrade mine. Was looking at the stinger 10" but for half the price and an inch less of screen seems like a better deal to me

 

some cold ones with the boyz

 

Oh, in that case he should ask @Colemillermma , Apparently a lot of people have been coming up to him to ask questions about his truck. I'm sure he'd have some ideas.

https://www.tacomaworld.com/threads/tired-of-people-approaching-me-about-my-truck.816041/

 

Install was actually really easy. Everything is plug and play with the included harness from Joying. Only tools used were a 10mm for removing the old headunit, and a screwdriver for the new one.

There were 3 wires that go unused with the Joying that tripped me up, but other than that it went quick.

 

Almost 5 years after purchasing it, I decided to install it today.

 

Nice. I might get one. My only question would be if the anytime front camera will work as it does with the factory head unit and rocker switch.