Wiring Questions

So who can help me with my wiring. I'd like to know what wires control what and the correct place to have them ran for correct operating procedure.
- No more Horn
- Turn Signals are flashing as if they were blown
- No reverse lights
- Door Locks don't work but windows do
- Windshield Wipers won't stop with switch
- No Cruise Control
- Fuel gauge reads incorrectly
- Temp gauge reads incorrectly

This is just some of things I'd like to have working but it's a work truck until I get it all repaired. I need to know what wires go where or a color schematic would help with identifying the wires easier.

 

These are for 98-00 but should be very similar

 

See if this helps

http://www.markofshame.com/fsm/01_Tacoma/01 Tacoma Wiring Manual.pdf

 

Sounds like a grounding issue. Check all your grounds.

 

Full manual https://charm.li/Toyota Truck/2001/Tacoma Extra Cab 4WD V6-3.4L (5VZ-FE)/

 

Ok. Thanks guys for the help. I'm possibly looking for now to get my wires that are free hanging right now from previous owner on where they are suppose to be. A picture would help if possible.

 

Check the IE and IG grounds

 

https://charm.li/Toyota/

Good info here, not just for Tacoma but other models as well all the way up to 2013.

Thanks for sharing!

 

That is a lot Mike. I'll do some research and look into it. Yeah my fuel gauge works just fine but I believe it's off some. Starts to run out of gas around 1/4 tank and I'd like to get that fixed for sure. Same as my Temp gauge. It starts and stays on operating temp at all times. Not knowing if it overheats or not kinda scares me but I'll just turn the heater on full blast if I suppose it is.