Complete fluid change.

Does all this look good? Best I could find here in Beirut Lebanon.

changing engine oil, gear oil for diffs and t case, power steering, brake fluid, and doing a transmission drain and fill but still waiting for the atf ws to arrive.

also, do I need these parts if I’m just doing a drain and fill on the transmission?

thanks guys.

 

Looks good...if your doing just a drain and fill on the tranny all you need is a new crush washer..

 

that’s a relief. Thanks!

 

Do you have all the crush washers for the diffs and T-case?

https://www.tacomaworld.com/threads/update-3rd-gen-maintenance-maps-get-300k-miles.789809/

This is what I ordered.
9043018008 X 2 Transfer Case Shift Shaft Seal (Front, Rear)
9043024017 X 1 GASKET FOR FRONT DIFFERENTIAL DRAIN PLUG; FOR REAR DIFFERENTIAL DRAIN PLUG; FRONT DIFFERENTIAL DRAIN PLUG.
1215710010 X 3 GASKET; PLUG

 

yup got them all, but I get them on Amazon. Rexka brand and they work great and are super cheap.

 

I believe u need multiple ones the process to drain and fill and get the proper level and temperature.

 

Nah, just reuse what’s on there until you’re done with the level check and then install the new one.

 

I change the drain washer ...but im guilty of never changing the over flow washer..

 

I was looking to change my fluid in my diffs and transfer case and found this brand on Amazon in a 12pc set. I was a little confused, are all 12 needed for the process? do any plugs get 2? or are there just extras?

Also I apologize if this was not the best place/way to ask this question, I'm still new to the forum. (Hello!)