TRD/ Magnuson 4.0 Supercharger Tips, Tricks, and Mods

Thanks dude!
Mine sounds different for sure I feel like...in a bad way.

 

Have ALL of them. In boxes waiting on the ability to tune. I’m about to do an ecu swap and tune it in HPT.

intake, boost tubes, fmic, cr turbos, spd downpipes… all of the mods

 

It seems like you're long overdue for a fall into mod psychosis! Glad to see it

 

Been busy with my C5.. standby for a post on the OTT thread with more on that. And other shenanigans..

 

Oh dam!!! That thing will be a beast! I thought tunes were available for the gen3?

 

2023.. It's a no-go.

 

and my truck has 92k, supercharger been on for 89k.

 

Blue: 1GR Dual VVTi w/ Maggy TVS1320
Vs.
Red: 2GR w/ Maggy TVS1900

 

do i see bigger isnt better?

 

I don’t think we can make that inference on that data point alone.

1GR has .5L displacement advantage. What I believe to be a higher rotor speed relative to the crank compared to the 2GR/TVS1900 (need to verify that) as that could be a large variable..

Just thought the close match up made for an interesting comparison!

 

yes, displacement always counts. rotational speed and cfm delivery will be intersting to see.

 

Bossman just text me a picture of them all standing by the TRD headquarters sign during their special tour and hangout yesterday and said he got me, and only me a gift from TRD. Lol

 

Why maggy only made a TVS for dual and not single is ridiculous!!

 

for the fuel pump does it matter if I install an external fuel filter? I picked up a fuel pump many moons ago but was not the URD kit. I had picked up similar one to @Lucario Runner but trucks in the shop and Tank had to be dropped so good time to FINALLY swap it out but won’t have the external fuel filter available but could try to get the Napa one for now like the URD. If so anyone have the part number? @12TRDTacoma finally

 

Does not need external or could be added later. I have the aeromotive 340 and still have plans (have a SS fuel filter.. I'm lazy) to install but been driving that way for a couple years now with no problems.

 

@nudavinci64
Use the factory Nissan fuel filter for the Z32 Nissan 300Z Twin Turbo. It's a replacement for the Napa one that comes with the urd kit.

I think @Athlaos posted about this in the past.

 

Nice! I’ll get it installed without for now. Good call on Nissan filter. I do have the PST setup but wasn’t ready to install. Good to know it’s not needed and figured since stock it does not bit the added filter seems good to add.

Since the tank is out it’s a last minute add. For the current work.

My plan eventually is this setup that some folks run. This is @henryp or @Lucario Runner so will be an update for later. I still need to get lines and fittings for it.

 

Still holding strong.

 

very nice! I really like this setup so it will happen at some point.

 

No page posted at this time but if anyone is looking for RCV Axles we have a group buy going. PM me for more info but should be a solid deal with enough folks Were close to getting an order in.