TRD/ Magnuson 4.0 Supercharger Tips, Tricks, and Mods

Friend of mine lives in London, tried to order a couple of these, and after placing an order, he got a message stating that it’s not in stock a day later.

 

In my best Homer Simpson voice - DOH!

Maybe you could try the other belt, 6 rib version K060705RPM? Slice a rib off...

 

I just found a place to run Dyno runs for only 250 bucks and you just got to call a day in advance to schedule your time and the kicker. It's only 12 minutes from my house. This is going to be fun haha

 

Nice! I need one next door.

 

I need to turn the phone off before I put the shorter belt and 2.7 pulley on that's staring at me on my counter lol

 

Be sure to email us for Gear Lock files. Otherwise, you're only going to be able to compare 3.5-4K RPM and above.

 

dang... I'm not toooo far north of you... what's the shop?!?

 

The Dyno shop in santee

 

I have no idea what gear lock files are I'm so ignorant with this stuff

 

It'll keep the transmission from downshifting when you're making a dyno pull, so you can start your pull at 2.5K RPM or so and do a full RPM sweep to Redline.

If you don't use a special gear lock file, you'll only be able to go WOT at 3.5K-4K to redline. If you try to go WOT earlier than that, the trans will downshift and totally botch your run.

 

And that's why you're the man and why you have my business!
I may need to do some research how to do a Dyno run properly first, I thought it was just mash the pedal down until I see Jesus or a checkered flag lol

 

It's a little more than that but it's not hard if you know what is needed.

 

@JustDSM are you still doing remote dyno tuning? This would be a good option for @FishingInSand to get good value out of the dyno session rather than just measuring.

 

We sure can and do. Did a Whipple Tundra the other day on a dyno in Rhode Island. Shoot us an email to coordinate it and get the discussion started.

Spoiler

info@overlandtailor.com

 

For those not on HPT, cruiser brother's has the Wholesale Automatics genII lockup kit on sale for 10% off. I know it's not cheap..just another option if you do other activities and need TC lockup

 

That always seemed like a neat gadget to add anyway.

 

Supposedly good for heavy laden rigs such as yourself and trailering. I'm curious how much it'll help with slip since I can notice it on the hills and in heavy silt. I was chatting with JD Fab and he mentioned it should help with trans temps in 2/3rd in the dirt where the TC is slipping and adjusting.

 

maybe we should get one then. =) I need to recover once I get my truck back. The truck is burning a hole in my wallet right now.

 

Got an OEM 76mm tb in from ebay today. Install went super smooth. Throttle response is fantastic! Epoxy wasn't that bad to chip off at all.

 

You work fast! That's some good work. 65->76mm right?