Enkei RPT1

Are these the Gunmetal or black finish? It's hard to tell with these! Do you have any more pictures?

 

They’re nice wheels but look incomplete without center caps

 

Taxes are files and money has partially been allocated for a set of E rated Cooper Discovery AT3 XLT’s in 265/70-18 for the silver wheels… will be back once installed and front suspension gets dialed in.

 

I traded a 2013 FRS for my Taco. I had RPF1s on it. I did not like the centercaps that were available for them at all. I picked up a few of these (I think they were 2" size), painted them matte black to match the wheels, put heat shrink on the spring clips and then maybe I bent them a little. Looked good and I never lost one. A good cheap basic option to check out.

https://www.homedepot.com/p/2-in-Knock-Out-Seal-60720/100150274

 

So I just talked to Enkei direct at their main offices in Texas in regards to the OEM Toyota TPMS fitment. They told me in all the years they’ve been available for sale, he had never heard of anyone having issues with the sensor fitment.

Any of you guys have issues???

Getting ready to have these things wrapped with rubber and want to make sure I’m not going to have any issues…

 

Toyota sensors fit fine.

I run Autel 1-Sensors in mine though. Then you have the option of a metal or rubber stem. Plus, they're so much more affordable.

 

most of the high end Japanese wheels look incomplete without the center cap. TE37’s look especially bad without them. I never understood how people could drop 3.5k on wheels without center caps and look at their truck and think “yeah this looks great” lol

 

Thanks for the info!

 

I bought OEM for the Tacoma and they fit perfect…

 

I have Enkei cyclones and have no problems with stock sensors

 

Here they are boys… silver 18x9 ZERO offset wrapped in 265/70-18E Cooper AT3 XLT’s… now just to mount, adjust coilovers (if needed), get OEM TMPS sensors linked and an alignment.

 

Now, where in these 30 pages of posts was the guy that used a rubber pipe cap as a center cap? Need that link if anyone remembers…

 

I used an electrical knockout.

 

Gen Metal 16"

IG: @cemented.racks should have more pictures

 

Wow……I like those!

 

These look great. Keen for photos of them on the truck!

 

Rain and cold winds today killed the plans for mounting them. Tomorrow I’m going to pull the stock wheels, adjust the front coils up about another 3/4-1” and then mount the new wheels. Try to get to shop Thursday for alignment.

Weather permitting… pics to come tomorrow!!

 

Pics?

 

All done! Suspension in front raised and adjusted, wheels and tires mounted and a bit of plastic trimming done. Going to have to get a CMC done once it warms up a bit.

 

This looks great!