For Stock Rigs Only

Beautiful dog, great photo

 

Well, think I'll go grab a coffee and then strap on the backpack blower and start on my spring yard cleanup.

@Delta09
My wife is named Karen. She always says "I'm not THAT Karen"
I tell her "we'll make that determination"

 

You like skating on thin ice. My wife’s name is Tina, I call her T

K
Kay

 

Flying back to Maine, great weekend, great wedding, great friends. Back to reality.

 

1/16" or 1/32" is not too bad.

 

One cut left a 1/8" gap as I cut a 22.5° piece a little short, but had a couple 16GA nails in it so I just sent it

Don't even notice it with caulk and a coat of paint so far. Priming all the old wooden trim with oil base primer so I'm probably gonna be high for a while

 

I've seen 3/8"+ gaps left by "professional" trim carpenters.

 

“Do your best and caulk the rest”

 

Hmmm, at this point I'm probably being too critical of my own work...

 

She definitely is NOT that Karen.

 

Home safe and sound. Work today is gonna be longggg.

 

Mornin properly peepers. Get some coffee and get after it today. It's only Tuesday afterall.

 

Work problems. Customer ordered 5 gallons of celing paint and 7 gallons of wall paint (all same color) from SW in Auburn. It was all boxed up. Turns out, they boxed up 3 gallons of ceiling and 9 wall. I'm short on ceiling. Will make a run to a local lumber/home improvement store to pick up more and will mix it in with existing as there's inevitably a slight difference among brands.

 

Of Course..

 

My neck hurts just after thinking about putting on 5 gallons of paint on a ceiling

 

Pffft he’s going to do it Michelangelo style..

 

You’re fault for getting married..
See!!! Starting already..
ROFLMAO…

JK…..
Make it a good one

 

8' ceilings.

 

*snap*

Yup, still hurting

 

Goes quick with a 12' roller.