Rubber Roof Moulding

SOLD

 

I need a LH side roof drip molding also. let me know if you have a contact or the part.

 

I am also looking for a set of left and right if anyone has some lying around, let me know your price!

 

Anyone have a set of these? I’m about to install the prinsu rack and have the stock roof rack in my truck. I am willing to ship and sell someone the discounted roof rack if we trade the molding in the deal!

 

I need the right side molding for a Double cab . If anyone has one - let me know too! Thanks!

 

I'm looking for both sides. My research shows that there's a piece that runs from the front to the back where the roof starts to curve down and another piece that's shorter that goes from there to the back window, plus two clips for each side.

 

I pulled mine partly off to install a Hooke Road roof rack. Trimmed around the shape of the feet and then stuffed these rubber drip rails back into the cracks. Since the double-sided tape was destroyed by removal, I put down a sporadic bead of black silicon caulk to hold it in place. I used Permatex brand, says "form-a-gasket" on the package.

 

You're right....just went ahead and bought.

 

Anyone know how to attach these?
I have a good set I need to cut to fit around a Sherpa rack (rubber pads)

but not sure how to attach

Most of it I’m guessing is

$6 3M VHB 100x200mm~ (4" X8") Double Sided Foam Adhesive Sheet Tape 5952 Automotive Mounting Industrial Grade Very High Bond 5952 (1 Sheets 100x200mm)

3M VHB. Hopefully someone knows details. If not I’ll measure to get a rough idea what length and width is needed.

the white plastic front clips that usually get knocked off to put a rack, I’m guessing get installed with a dab of RTV.

because whatever is underneath to remove for roof rack install using a rubber buffing wheel seems soft and comes off, suggesting RTV. Or dab of silicone or seam sealer.

rather than something that dries hard like glue or epoxy.

 

When i replaced mine i added extra 3m double sided tape and rtv where the clip is toward the front

 

thanks
I’ll do that since I have or will get that anyway

to avoid spending extra money on whatever tubes I saw at Autozone that’ll have who knows what result