Sell it?

My fancy TRD valve stem caps are seized on the valve stems?
Rubber is good tires don’t loose air so I’m ok for now maybe it’s time to shop for something else?
Plus I’m gonna have to change oil soon. Not sure if it needs filter done?
Truck is so needy!

 

Oy veh! Yes sell it Gomer!

 

I'll give you tree-fiddy for it!

 

In for the Friday hit parade I see............

 

take a torch to the valve stem

careful dont torch the sidewall

 

Honestly, change the filter every time you change the oil. No good reason not to. Filters are cheap and you'll get a more complete drain by removing it.

As for the valve caps, could it be because of dissimilar metal corrosion? Are the maybe aluminum and the valve stem is something else? A little bit of lube in the threads may prevent it in the future. Ooooor, it's a great excuse to go shopping for new wheels.

 

Fifty with the swing and miss…….

 

yes it’s aluminum caps and corrosion I’m gonna use a die grinder to cut them at some point.
They were fine until dealer had it may just be over tightened?

 

Impact wrench will do it

 

Lemon Law it

 

I'm thinking air hammer with a chisel tip

 

I will start with this then move to the air chisel.
Do you know what size socket I should use?

 

All 4 are seized should qualify!

 

Take it to the dealer,I'm surprised your dash didn't light up to tell you to do this.

 

it did and also reminded me about my wife’s birthday.
I just reset it and drive on!

 

I did the same thing last year. I'll be using the cheap plastic ones from now on.