What Have You Done To Your 2nd Gen Tacoma Today?

It was very easy, especially having the tow package hook up. I got everything at etrailer, which I recommend:

1) 331-EBRH-ACCV2 (Redarc Tow-Pro Elite Trailer Brake Controller - 1 to 3 Axles)
2) 3040-S (Tekonsha Custom Wiring Adapter for Trailer Brake Controllers)
3) 331-TPSI-002 (Mounting Panel for Redarc Tow-Pro Elite Trailer Brake Controller Control Knob)

 

For other buyers, the tow pro liberty is a cheaper option that drops offroad mode and only does 1-2 axles
Perfectly fine for 95% of trucks

 

Is the Tekonsha adapter needed? I bought the elite with the tacoma package. It looks like it has everything. Idk.

 

To be honest with you, I had no idea this was available and probably what I would select if I did it again, I would assume you could use this with the other two parts that I mentioned.

 

I believe it is needed. You could always contact etrailer or redarc and ask them.

 

Lubed my TC upper control arms and installed new lower shock bolts and nuts.

 

Who shit in your cheerios?

I’ll defend him, because he shouldn’t have to stoop so low

1. Who says he was on the clock
2. Different states do things differently. See a state or town logo on that plow truck? No? Because mass contracts that shit out 90% of the time. He’s working for a private company that is subcontracted to plow by the town or state

 

Yep, you can.

 

Well, this set lasted 1 week...... stuffed the tire while offroafing and immediately heard it break. ABS just isn't cutting it

 

just installed the seat riser blocks mod... still trying ti decide i like it or not...

 

How you like the husky liners?

 

is this home made?

makes me wonder if C4 liners > FendX due to being metal

though the FendX looks like a softer plastic that may be less brittle and less likely to crack/break

fendX site says they’re formulated to be indestructible
Heard they’re harder to install than C4

 

What was the temperature like? Maybe they were brittle from the cold. I saw these fender liners when searching the other day but man are they expensive. Maybe you can fab them yourself?

https://c4fabrication.com/products/...14205&pr_ref_pid=8053464760541&pr_seq=uniform

 

aluminum sheet

 

Yes. Homemade. I bought a couple 4'x8' sheets of ABS plastic for about $25 a piece.

I've gotten pretty quick and making them but I am sick of doing it over and over. Unbreakable, eh? That sound like a challenge.

 

I've looked I to the c4's but I can't justify that kind of $. I buy 4'x8' sheets of ABS for about $25 a sheet. I may try to fab some out of aluminum, but that will require an entire redesign. ABS is so easy to work with, and I've heard that kydex is a good option that is simular to work with, but more resilient.

It was not at all cold. Set before these broke snow wheeling, as well as a couple sets before that one. Cold definitely makes this material more brittle. This time it was just blunt force that did it.

 

Probably my next step. Gonna require a redesign as I'm not gonna be able to mold aluminum like the ABS with a heat gun.

 

Bud I honestly hope you are just TRYING to be funny. When treating or plowing DOT mandates you can only be behind the wheel for a certain number of hours - then you HAVE TO park it. Some guys sleep during a 20 plus hour call-in - I choose to work on my truck.

So relax Francis. Your tax dollars are being spent on far worse things than my salary - working thru the night to make sure the roads are safe for appreciative people like yourself. <flame off>

 

Time to invest in a bending brake?

 

It would sure make it easier. I've always done it by hand with some 2"x6" scraps and some clamps.