Little Red Turbo Creeper

Me 3, also curious

 

Yes I am. They are holding up WAY better than the Durobumps I had and their customer service is awesome.
I ended up sending my Durobumps out to Perry Parts so they could test them with their suspension machine

 

I'll need to do some more fukinaroun to find out, But I usually rub the passenger tire pulling into the parking lot at work (big gutters) and that didn't happen this morning so that's progress.

They offer two different sizes, the ones I have are recommended for 34's or smaller

 

Changes the oil, 0w-40 Mobile 1 euro spec full synthetic with a couple oz of Motorkote and the larger YZZD3 Toyota filter.



I collected a sample for Blackstone to analyze, I'll be interested to see what they find

 

You just posted your full name and address, just FYI

 

@Speedytech7 I knew there was a reason I took a picture with the bag laying down instead of standing up lol

 

How else am I supposed to get love letters in the mail?

 

I got a chance to put the bumpstops to the test a bit today while bouncing around the desert, Very pleased with their performance. I haven't rubbed a single time since adding the second set to the LCA.

I also got a chance to really appreciate how well the side bolsters from the Corbeau seats keep me planted while driving aggressively.


4x4 + Stututuu =

 

Drove around today in a mixture of rain, snow, wind, and sunshine.

Truck still drives well, a little bumpy on the washboard roads and the trans temp climbed into the 190's a couple of times while going through some hills.

I still need to inspect the valves.

 

190s are nothing to be concerned about. But the amount of blow by oil you have is concerning I think. Like I'd take off your valve covers and make sure the baffles are still there. I doubt it has anything to do with your valves at all though. Can't hurt to check them but something is up with how much oil is passing throigh your PCV system.

 

The last couple times I've dumped the catch can it's been mostly water

 

Makes me think about all the water in @yota243 's IC

 

That's puzzling

 

Glad I'm not the only one who thought so

 

Making sure the Baffles are still there baffles me. I know there's some thin metal plates on the inside of the valve covers that don't come out. I remember seeing them and trying to avoid damaging them when I put new spark plug tube seals in and I remember cleaning a little bit varnish off of them and never had a second thought beyond that. I'll see I have some pictures of the covers before they went back on

 

@Speedytech7
Found the passenger side valve cover while it was off. Is it baffling haha?

 

Just going to put this here so I don't forget

https://motorwestperformance.com/product/upgrade-for-23250-62040/

I might as well get some new injectors on hand for the next time the intake is off

 

If you're going to go haltech, save the scratch for bigger injectors instead

 

Probably a good idea