spare tire fitment..?

Can a 265/70R17 fit with ease as a spare on 3rd gen Tacomas? TIA!

 

yes.

source: i have one

 

what wheel setup are you running?

 

yup, you can go 2 sizes bigger from that np.

 

265/70r17 Goodyear Ultra Terrains on FN FX Pros, which i think are 0mm offset with 4.5" backspacing.

 

I have a bfg AT 285/70/17 under there, tiny space between tire and exhaust but all good. didnt have to bend anything

 

same as Pista-

I also ran a BFG KO2 285/70/17s underneath before moving to backdoor of the camper.

My buddy runs the same size but KM3s and they fit underneath too.

 

you fellas running stock wheels or?

 

The spare is on a a oem aluminum 17" wheel. on the truck I have KMC 's 17" 0 offset

 

shoot.. i was trying to fit an aftermarket wheel under there as a spare.

 

the FN FX PROS currently in place of your spare tire location correct? i want to make sure we’re on the same page lol.

 

Why would the type of wheel in the middle matter? The diameter and thickness of the tire around the wheel is what dictates the space available to mount. Any wheel that fits the Tacoma hub bore will mount underneath just like the stock spare.

 

correct, i replaced my spare with a 17" fx Pro so they would all match.

 

I had a full size BFG KO2 275/70/70 at 40 psi mounted to a Vision Manx II 17x9 +12mm offset in the stock spare location of my rig. I have heard others say that 285s fit without issue and anything larger than 285s would need to be aired down to fit. No experience with 285s + so take what I heard with a handful of pink Himalayan.

 

goddamn! 70" rim?

 

haha. whoops. Leaving the typo there.

 

i was worried about the backspacing.

 

XD

 

both on AEV Crestone wheels